1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Prius Pix from Iowa -- Is this a concern? Anyone seen this?

Discussion in 'Gen 2 Prius Care, Maintenance and Troubleshooting' started by cyberpriusII, Dec 2, 2014.

  1. cyberpriusII

    cyberpriusII Prodigyplace says I'm Super Kris

    Joined:
    Oct 1, 2009
    1,139
    1,598
    0
    Location:
    Iowa
    Vehicle:
    2008 Prius
    Model:
    N/A
    I have put some pix down below. There seems to be some sort of black "stuff" that looks like oil on a couple of the bolts on top the engine.

    The first picture is of the bolt that holds the "thing" that connects to number 3 cylinder spark plug. It looks like oil on the top of the bolt, but I put a Q-Tip down into it and nothing is soaking into the cotton from the bolt. I also tried to feel around, but since it is a balmy 20 degrees F, my fingers are not working all that well, but the stuff seems to be some sort of dried glaze.

    The second pix is sort of the same thing. But, this is an actual bolt that goes into the "valve cover???" just to the right of the spark plug thing for the number 1 cylinder. All the other bolts up there are clean, except for some left-over mice debris...

    Car has some 60 K miles.

    Oil level seems fine.

    Just ignore it?

    OK, the forum for some reason is not letting me upload the pixs. Hope this makes sense without them...

    Kris
     
    #1 cyberpriusII, Dec 2, 2014
  2. GrumpyCabbie

    GrumpyCabbie Senior Member

    Joined:
    Dec 14, 2009
    6,722
    2,121
    45
    Location:
    North Yorkshire, UK
    Vehicle:
    2010 Prius
    Model:
    III
    Is the car using any water? What's the level like?

    Without seeing the pictures it's hard to guess, but could it just be oil that's spilt when being poured in?
     
    #2 GrumpyCabbie, Dec 2, 2014
  3. dorunron

    dorunron Senior Member

    Joined:
    Jul 17, 2011
    3,318
    1,103
    0
    Location:
    Houston, TX
    Vehicle:
    2013 Prius
    Model:
    Three
    Not sure of your files you are uploading Kris. Try jpeg format and limit the size of the file to 800 x 1200 or something similar. File size might be too big if you are using a digital camera and not making the file smaller... Servers do limit what we can upload.

    Try again, the pics will really help us.

    Hope you had a great Thanksgiving and will have a wonderful Christmas too!

    Ron (dorunron)
     
    #3 dorunron, Dec 2, 2014
  4. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    109,389
    49,729
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    might need a new valve cover gasket. any hose disconnect from the pcv?
     
    #4 bisco, Dec 2, 2014
  5. edthefox5

    edthefox5 Senior Member

    Joined:
    Jul 25, 2007
    10,096
    4,810
    0
    Location:
    Clearwater, Florida
    Vehicle:
    2007 Prius
    Model:
    Two
    Ignore it.
     
    #5 edthefox5, Dec 3, 2014
  6. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    109,389
    49,729
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    maybe steam clean it, and then look to see where it's leaking from?
     
    #6 bisco, Dec 3, 2014
(You must log in or sign up to post here.)