1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Replaced Inverter in 2013 prius and fixed codes for a day now throwing U0110 w/ check hybrid system

Discussion in 'Gen 3 Prius Care, Maintenance & Troubleshooting' started by Why Car No Go, Sep 1, 2024 at 7:24 PM.

  1. Why Car No Go

    Why Car No Go New Member

    Joined:
    Yesterday
    1
    0
    0
    Location:
    chico ca
    Vehicle:
    2013 Prius
    Model:
    Three
    2013 Prius had recently hit 200k+ miles and was giving me codes P0A7A & P0A94 after check hybrid system message appeared. I am the second owner of the car and was sold to me as is from a dealership. After replacing the inverter and clearing codes I test drove the car for about 30 miles around town and no issues. The next day the check hybrid system message appeared again but is now showing U0110 under hybrid control codes. Is replacing the Drive motor control module the next step?

    Old Inverter w/ codes:

    old inverter.jpg old.jpg old inverter codes.jpg

    New inverter w/ codes:

    new inverter.jpg After inverter replacment.jpg u0110 code.jpg check engine light.jpg
     

    Attached Files:

    #1 Why Car No Go, Sep 1, 2024 at 7:24 PM
(You must log in or sign up to post here.)