1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Steering rack makes rattling noises over bumps

Discussion in 'Gen 3 Prius Main Forum' started by douglasjre, Jul 18, 2024 at 12:14 AM.

  1. douglasjre

    douglasjre Senior Member

    Joined:
    Sep 13, 2008
    1,875
    651
    0
    Location:
    Orlando, FL
    Vehicle:
    2010 Prius
    Model:
    ----USA----
    It's not the ball joints because I already replaced those. I even replaced the lower control arms. Got new shocks and struts. There's some rattling inside the rack. When I go over potholes. It started after spending a year in New York City with the car. Is there a way of tightening this like a lash adjustment or is it needing a new rack?
     
  2. Tombukt2

    Tombukt2 Senior Member

    Joined:
    Nov 29, 2020
    9,105
    1,577
    0
    Location:
    Durham NC
    Vehicle:
    2009 Prius
    Model:
    Base
    There used to be a big hex adjusting nut that adjusted the sea washer or c looking piece of metal against the rack and it's lubrication inside I think that's been taken away now It's no longer on the Toyota racks The place where it goes is there you can see it's a big oh I don't know 27 mm or something whole or it would be a hole The land is there where the hole would be drilled but there's nothing drilled and then on later models the casting has been changed doesn't even show where that point would be so I think the adjustment is gone.
     
  3. JC91006

    JC91006 Senior Member

    Joined:
    Nov 10, 2013
    16,482
    8,397
    0
    Location:
    Los Angeles, CA
    Vehicle:
    2008 Prius
    Model:
    II
    I have this exact issue, on 2 of my gen2 prius. 2005 and 2008. I have not figured out what the cause is, the steering is nice and tight so it's not a problem with the intermediate shaft. I hope someone can get to the bottom of this
     
  4. Eddie25

    Eddie25 Active Member

    Joined:
    Dec 31, 2018
    368
    135
    0
    Location:
    IL
    Vehicle:
    2011 Prius
    Model:
    III
  5. JC91006

    JC91006 Senior Member

    Joined:
    Nov 10, 2013
    16,482
    8,397
    0
    Location:
    Los Angeles, CA
    Vehicle:
    2008 Prius
    Model:
    II
    I looked this part up for the 2nd gen cars, it's showing not compatible. Maybe just for the 3rd gen.....