1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Where Can I Purchase a Board for My NAV???

Discussion in 'Gen 2 Prius Audio and Electronics' started by LOLGuy, Oct 11, 2007.

  1. LOLGuy

    LOLGuy Member

    Joined:
    Jan 22, 2005
    177
    21
    0
    Location:
    Tampa, FL
    Vehicle:
    2016 Prius
    Model:
    Four
    Looks like one of the problems I had was that one of the flat cables connecting the two circuit boards was askew and unable to be reassembled because the clip is broken. As such, I now get an error message that the unit is not attached.

    In the following picture it's the clip holding the cable to the smaller board from the larger.

    It's a gen 4 unit and any thoughts on where a board could be purchased is greatly appreciated.


    [​IMG]
    photo by vkykam
     
    #1 LOLGuy, Oct 11, 2007
  2. qbee42

    qbee42 My other car is a boat

    Joined:
    Mar 2, 2006
    18,058
    3,074
    7
    Location:
    Northern Michigan
    Vehicle:
    2006 Prius
    How about replacing the connector instead of the entire board. Digikey is a good source.

    Tom
     
    #2 qbee42, Oct 11, 2007
  3. LOLGuy

    LOLGuy Member

    Joined:
    Jan 22, 2005
    177
    21
    0
    Location:
    Tampa, FL
    Vehicle:
    2016 Prius
    Model:
    Four
    Thanks for your reply. The ribbon cable is okay. The "clamp" on the smaller board is damaged and will not hold the the cable in place. Can that be replaced?
     
    #3 LOLGuy, Oct 11, 2007
(You must log in or sign up to post here.)