1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Windshield Wiper Spray

Discussion in 'Gen 2 Prius Care, Maintenance and Troubleshooting' started by hunterxaz, Jan 18, 2011.

  1. hunterxaz

    hunterxaz New Member

    Joined:
    Jan 10, 2011
    28
    0
    0
    Location:
    Salt Lake City, UT
    Vehicle:
    2007 Prius
    Model:
    N/A
    My windshield wiper spray doesn't work. The juice just kind of sputters out, it doesn't shoot out. The tank is full, and the rear-window wiper nozzle works fine. What are some things I can do to troubleshoot this?
     
  2. Rokeby

    Rokeby Member

    Joined:
    Jan 21, 2008
    3,033
    708
    75
    Location:
    Ballamer, Merlin
    Vehicle:
    2008 Prius
    Sounds like something is clogging the washer fluid nozzle hole(s).

    You can try to clear them out with a straight pin or needle. An unfolded
    paper clip may work, but if it doesn't fit without forcing it, STOP. You
    don't want to goober up the hole and get an erratic spray pattern.

    If this doesn't work, you may need to unhook the tube for the washer
    fluid at the nozzle and try to "back flush" the nozzle with some
    water/fluid.

    FWIW, the hole in the nozzle is in a small spherical bead. You can re-aim
    the fliud streams by inserting the pin/needle/clip deeply in the nozzle hole
    and then twisting the bead to re-aim it. Be careful, small changes can
    result in large changes in the spray pattern. (Don't ask how I know. :rolleyes:)
     
  3. hunterxaz

    hunterxaz New Member

    Joined:
    Jan 10, 2011
    28
    0
    0
    Location:
    Salt Lake City, UT
    Vehicle:
    2007 Prius
    Model:
    N/A
    I'll take a look tomorrow. I tried the toothbrush + vinegar trick tonight but may need to do a pin. I'll post results.
     
  4. AvTech72

    AvTech72 Junior Member

    Joined:
    Sep 4, 2019
    28
    1
    0
    Location:
    Miami Beach, FL 33140
    Vehicle:
    2008 Prius
    Model:
    Three Touring
    Any results to your issue?