Toyota Signal Mirrors

[Inthewind]

Looks good. Now if I can just get them to respond to my one of 3 inquiries: Ebay, their website and an email. Lets hope they have a good amount in stock the way this thread is getting attention!

Oops, Ciaro...are the instructions in Japanese?

[mrbigh]

<div class='quotetop'>QUOTE(Inthewind @ Oct 14 2006, 06:56 PM) [snapback]332852[/snapback]</div>

How are the instructions? Are the in Japanese? Also, the picture didn't show the wire harness. Does it appear to be complete?
[/b]

The instructions are in a form of a booklet, I glimpsed thought it but there are very detailed drawings and in plain English.
The wiring harness looks to be very well made for a retrofit of this kind and very complete. I will not use it; my wiring is already in place, from a year past. I will replace an existing signaling light.
On Monday I will scan the instructions at the store and will post them on line so everybody can judge.
My Engine Block Heater is finally in place, after few skin gauges.

[FL Buckeye]

Hope my order comes this week. But LOML is still waiting on a B-day card mailed from Ohio over a week ago, so hard to say now long a pkg from HK will take.

Can anyone comment on how hard it is to remove the mirror glass from the assembly? A picture of the backside of the mirror glass would be nice. My only concern so far is how to remove the mirror without breaking it.

[DocVijay]

<div class='quotetop'>QUOTE(FL Buckeye @ Oct 15 2006, 12:30 PM) [snapback]333000[/snapback]</div>

Hope my order comes this week. But LOML is still waiting on a B-day card mailed from Ohio over a week ago, so hard to say now long a pkg from HK will take.

Can anyone comment on how hard it is to remove the mirror glass from the assembly? A picture of the backside of the mirror glass would be nice. My only concern so far is how to remove the mirror without breaking it.
[/b]

Here is a quick disassembly primer:

1) Push in the top of the mirror. You need to get a screwdriver in the bottom.

2) There are two places where the mirror is clipped on. If you peek under the mirror fromt he bottom you should be able to see two slots in the white plastic piece attached to the black plastic of the mirror. Insert a wide blade screwdriver into each of these slots and twist. The mirror should pop free from the white plastic part.

3) Now tilt the mirror away from the bottom and slide it up off the white plastic part. This may or may not be easy, depending on how tight the clips are. The mirror should come off.

4) Unplug the two wires for the heated mirror function.


Now you should be able to see all the clips for hte body colored shell. You can use a flat screwdriver to push these clips out from inside and get the shell off.

From there just follow the wiring instructions and before you know it you're done (or very frustrated :P ).

Whoever does this first needs to post pics so we can compare.

[FL Buckeye]

<div class='quotetop'>QUOTE(DocVijay @ Oct 15 2006, 12:44 PM) [snapback]333005[/snapback]</div>

Here is a quick disassembly primer:
[/b]

Thanks for the quick reply. I just checked the tracking # for my pkg and it was at Kennedy early yesterday and through customs for the USPS, so maybe sometime this week it will make it to FL.

[Inthewind]

Tommy answered today and I've sent payment. Hopefully I can get them before I do my clearBra. Anyone have an order to delivery time to the east coast? I know several of you have already received them. Sometimes my impatience gets the best of me! :P

Once I get them I'll do a pictorial.

[Godiva]

Are you saying you can install the signal mirror backs without taking apart the doors? I thought you had to remove the doors and do some major wiring to get the mirrors to signal. (I don't care if mine fold or heat.)

[Inthewind]

<div class='quotetop'>QUOTE(Godiva @ Oct 15 2006, 06:20 PM) [snapback]333115[/snapback]</div>

Are you saying you can install the signal mirror backs without taking apart the doors? I thought you had to remove the doors and do some major wiring to get the mirrors to signal. (I don't care if mine fold or heat.)
[/b]

Godiva,
You have to remove the door panels, not the entire door. Check DocVijays sig for hid mod website. He's pretty much detailed it out for us.

[DocVijay]

<div class='quotetop'>QUOTE(Inthewind @ Oct 15 2006, 06:27 PM) [snapback]333121[/snapback]</div>

Godiva,
You have to remove the door panels, not the entire door. Check DocVijays sig for hid mod website. He's pretty much detailed it out for us.
[/b]

Yes, the door panels have to be removed to run the wiring. At leat you won't have to disassemble the mirrors. Well not too much anyway.

[cairo94507]

<div class='quotetop'>QUOTE(DocVijay @ Oct 15 2006, 05:54 PM) [snapback]333132[/snapback]</div>

Yes, the door panels have to be removed to run the wiring. At leat you won't have to disassemble the mirrors. Well not too much anyway.
[/b]

The ddor panels are a piece of cake to take off- they come in about 1 minute. Do not sweat it all you have to do is make sure you pull carefully to unsnap the plugs that hold the panel to the door so you don't break on of the plastic replaceable clips. Probably 1.25 each or something. Nothing to lose sleep over that's for sure.

I will have my mirror backs back by Friday to install on Saturday- looking forward to it. Pictures will of course follow.