ScanGaugeII work on 2010?

[taxachusetts]

Hey all,

Anyone know if the Scan Gauge II will work on the 2010 Prius?

I have one now on my '08, but I am picking up a '10 tomorrow.

If no one knows, I guess I'll find out soon enuf...

Thanks

[bestmapman]

The xgauges for the Gen II do not work for the Gen III. So SOC BTA and others are useless. Also, the fuel flow part of the SG does not work properly For instance, when the ICE is off (showing 0 RPM) there is still fuel flow indicated and MPG are in the 200 range.

So the SG still works good for things like RPM, IGN TPS WTF, but anything pertaiing to fuel flow is off some.

[carz89]

Originally Posted by bestmapman

The xgauges for the Gen II do not work for the Gen III. So SOC BTA and others are useless. Also, the fuel flow part of the SG does not work properly For instance, when the ICE is off (showing 0 RPM) there is still fuel flow indicated and MPG are in the 200 range.

So the SG still works good for things like RPM, IGN TPS WTF, but anything pertaiing to fuel flow is off some.

If you go to their website and look at the compatability list (which they haven't updated for 2010), the ScanGauge is compatible with all new vehicles. I see no reason why it wouldn't work in the 2010 Prius.

Just as for the Gen2 Prius, the "Prius-specific" items like SOC, battery amps, high voltage, etc are user programmable. Someone must first figure out and publish the codes necessary to program these gages into the device. I suspect that this is being worked on by someone here at PriusChat as we speak. It would sure would have been convenient if the codes were the same, but I guess we have no such luck.

[fgp]

it works on mine. at least the guages i like. that is rpm, mph and water temp,

[john1701a]

I've been using mine in the 2010 for a few weeks now.

Seeing 0 RPM at 45 MPH has become a frequent favorite.

So obviously, it works just fine.
.

[HTMLSpinnr]

What's the lowest RPM you've seen when not at 0? When loping along at 40mph on ICE power, it sounds pretty low (800-1000 RPM or less).

[hotbrass]

1030 rpm.

[timo27]

Originally Posted by hotbrass

1030 rpm.

Interesting. My personal low, so to speak, is 996 rpm--seen it often. I wonder if it is a quirk in the ScanGauge or in the car?

[a64pilot]

I see 992, again often, and closed loop and indicating fuel consumption, and that's a tiny down hill at 45 MPH. See 1000 - 1100 steady state at 45 MPH, flat land.

[hobbit]

996 is when you're in warp-stealth, by and large. No fuel being
injected. I think it comes up a little over 1000 as the engine
lights again.
.
_H*