Check engine light on checked MFD , obtained codes

SO today my check engine light came on. I did some research and tightened the gas cap a few times assuring there were a few clicks..... which I am not entirely sure that is the issue, since the light is still on.

I also forgot about this: First, turn the car on, then push and HOLD the "INFO" button (on the lower right side of the MFD) and while holding the INFO button on, toggle the headlight switch three times from on to off. The MFD will popup a display that has the status of EMV, Audio, and G/W. Now release the INFO button and press the "LAN Monitor" touch button on the lower left of the MFD, it will display if any coded were sensed, If it indicates a code was set, touch the code text in the MFD, it will then display what the codes are.

this is what the display read EMV Service

01-DB 190- FD F
01 D5 190-SE F
01 DB 110- 19-4


does anyone know what this means?