1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Cold air Intake? - Not a Joke or Noob question

Discussion in 'Gen 2 Prius Accessories & Modifications' started by Daves09prius, Feb 11, 2012.

  1. edthefox5

    edthefox5 Senior Member

    Joined:
    Jul 25, 2007
    10,096
    4,817
    0
    Location:
    Clearwater, Florida
    Vehicle:
    2007 Prius
    Model:
    Two
    For some reason the picture you posted just cleared up. Its the 2 blues.
     
  2. Justdidit

    Justdidit LVNPZEV

    Joined:
    Jun 12, 2012
    1,880
    710
    75
    Location:
    Carrollton, Texas
    Vehicle:
    2007 Prius
    Model:
    Four Touring
    Awesome... swinging by my local HD now 2 pick up the suggested parts... (1) brass 3/8 inch barrel and (2) small hose clamps.
     
  3. edthefox5

    edthefox5 Senior Member

    Joined:
    Jul 25, 2007
    10,096
    4,817
    0
    Location:
    Clearwater, Florida
    Vehicle:
    2007 Prius
    Model:
    Two
    Its easy. Just don't cut your hands on the rad. It's a tight fit there. You can re-use the crimp clamps but I prefer a good old hose clamp.
     
  4. Justdidit

    Justdidit LVNPZEV

    Joined:
    Jun 12, 2012
    1,880
    710
    75
    Location:
    Carrollton, Texas
    Vehicle:
    2007 Prius
    Model:
    Four Touring
    Bought the parts from HD... cost just under $6 - will post pix up later.
     
  5. Daves09prius

    Daves09prius Active Member

    Joined:
    Nov 20, 2010
    680
    161
    0
    Location:
    Gettysburg, PA
    Vehicle:
    2009 Prius
    Model:
    One
    Any plans on making more complete aluminum mandrel bent intakes (w/ correct MAF adapter) for those who are interested in buying?
     
  6. Justdidit

    Justdidit LVNPZEV

    Joined:
    Jun 12, 2012
    1,880
    710
    75
    Location:
    Carrollton, Texas
    Vehicle:
    2007 Prius
    Model:
    Four Touring
    Of course, I want to test both versions out and actually dyno them both. I just don't know if I'll get them welded up before I get my DC header on. I'd like to dyno each mod to see what the difference actually is for each and then together. Going to talk to a welder today and also trying to get in contact with a skilled welder in LA and see what I can come up with.
     
    Daves09prius likes this.
  7. Daves09prius

    Daves09prius Active Member

    Joined:
    Nov 20, 2010
    680
    161
    0
    Location:
    Gettysburg, PA
    Vehicle:
    2009 Prius
    Model:
    One
    Awesome! I think you'll notice a lot with the header. I noticed a lot when I changed to the NISMO CAT-less header on my nissan SPEC-V, but then again that was an otto cycle engine... Please keep us updated on the intake and all the other mods you're doing! :)
     
  8. Justdidit

    Justdidit LVNPZEV

    Joined:
    Jun 12, 2012
    1,880
    710
    75
    Location:
    Carrollton, Texas
    Vehicle:
    2007 Prius
    Model:
    Four Touring
    ...AAAAAAAnd it was CAT-Less :) After we heard back from ToyoTechWV and his experience with his exhaust..

    Once I add the header, I'm seriously considering cutting off the 2nd Cat as well and welding in (2) 7" round Magnaflow mufflers as resonators and calling it good. There is enough room for 2 round mufflers there in the middle of the car vs having to have one in the back like OEM. Haven't decided if I'll dump the exhaust or route it back to the rear of the car and do something like this..

    [​IMG]
    maybe more of this angle...just not chrome (blacked out).
    [​IMG]
    Just not sticking out so far - more streamline..

    or the norm..out the rear like the original..just blacked out tips.
    Slant (blacked out)
    [​IMG]
    Or Straight (blacked out)
    [​IMG]
     
    Daves09prius likes this.
  9. Justdidit

    Justdidit LVNPZEV

    Joined:
    Jun 12, 2012
    1,880
    710
    75
    Location:
    Carrollton, Texas
    Vehicle:
    2007 Prius
    Model:
    Four Touring

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     
  10. Justdidit

    Justdidit LVNPZEV

    Joined:
    Jun 12, 2012
    1,880
    710
    75
    Location:
    Carrollton, Texas
    Vehicle:
    2007 Prius
    Model:
    Four Touring
    Got one piece welded!!
    [​IMG]
     
    Daves09prius likes this.
  11. 69shovlhed

    69shovlhed Surly tree hugger

    Joined:
    May 13, 2012
    2,170
    749
    0
    Location:
    Delaware
    Vehicle:
    2017 Prius Prime
    Model:
    Prime Premium
    when you get this stuff all done, you will have to drag race someone out there on the left coast to see how it goes. cool stuff you got goin', fo' sho'!
     
    Justdidit likes this.
  12. yangjiesheng

    yangjiesheng Junior Member

    Joined:
    Feb 12, 2012
    21
    10
    0
    Location:
    Singapore
    Vehicle:
    2007 Prius
    Model:
    II
    hi guys,

    like to get a 90 degree reducer from ebay.
    can i know, the prius throttle size is 2.25"? that why your are using 2.25" to 2" to connect to the 2" customized maf housing?
     
  13. Justdidit

    Justdidit LVNPZEV

    Joined:
    Jun 12, 2012
    1,880
    710
    75
    Location:
    Carrollton, Texas
    Vehicle:
    2007 Prius
    Model:
    Four Touring
    2004-2009 throttle body is 51mm or 2"

    My "test fit Yaris MAF housing" was 2.25 - so i had to use a reducer. My new MAF housing I had CNC'd is 2" - no need for adapter.
     
  14. yangjiesheng

    yangjiesheng Junior Member

    Joined:
    Feb 12, 2012
    21
    10
    0
    Location:
    Singapore
    Vehicle:
    2007 Prius
    Model:
    II
     
  15. Justdidit

    Justdidit LVNPZEV

    Joined:
    Jun 12, 2012
    1,880
    710
    75
    Location:
    Carrollton, Texas
    Vehicle:
    2007 Prius
    Model:
    Four Touring
    Yes??
     
  16. yangjiesheng

    yangjiesheng Junior Member

    Joined:
    Feb 12, 2012
    21
    10
    0
    Location:
    Singapore
    Vehicle:
    2007 Prius
    Model:
    II
    i custom order from kstech.biz for a 2" ID MAF housing after i read this thread. so excited so i was wondering why u chosen 2.25 reducer.

    so based on my setting, i wouldneed a 90 degree 2"-2". is it correct?
     
  17. Justdidit

    Justdidit LVNPZEV

    Joined:
    Jun 12, 2012
    1,880
    710
    75
    Location:
    Carrollton, Texas
    Vehicle:
    2007 Prius
    Model:
    Four Touring
    $105 - Not bad! A bit more than I paid for mine.

    The 2.25 reducer was for the original design I had made from a Yaris intake which is 2.25" to have it fit the 2" Prius throttle I needed the reducer. Since we both now have 2" MAF housings u just need a 2" coupler in whatever angle you need. If you want to place the MAF in the similar position I did, then yes a 2" silicone 90° coupler would be perfect. Then slap on a filter and enjoy!!
     
  18. yangjiesheng

    yangjiesheng Junior Member

    Joined:
    Feb 12, 2012
    21
    10
    0
    Location:
    Singapore
    Vehicle:
    2007 Prius
    Model:
    II
    Yes! Finally shippment arrived!
    Going to get either hks reload filter or apexi
     

    Attached Files:

    SFO and Daves09prius like this.
  19. yangjiesheng

    yangjiesheng Junior Member

    Joined:
    Feb 12, 2012
    21
    10
    0
    Location:
    Singapore
    Vehicle:
    2007 Prius
    Model:
    II
    Done the by pass coolant!
    Excellent! Weather here 29-36c throughout the year, prolong journey sure can see the benefit!
     

    Attached Files:

    SFO and Justdidit like this.
  20. Justdidit

    Justdidit LVNPZEV

    Joined:
    Jun 12, 2012
    1,880
    710
    75
    Location:
    Carrollton, Texas
    Vehicle:
    2007 Prius
    Model:
    Four Touring
    Do I spy another JET performance MAF user?
     
    Daves09prius likes this.