1. Attachments are working again! Check out this thread for more details and to report any other bugs.

2012 Prius Headlights

Discussion in 'Gen 3 Prius Accessories and Modifications' started by brakeshoe87, Oct 10, 2013.

  1. brakeshoe87

    brakeshoe87 Junior Member

    Joined:
    Jun 4, 2013
    8
    0
    0
    Vehicle:
    2012 Prius
    Model:
    Two
    I have a 2012 Prius and I am pretty disappointed with the headlight performance. I never had a problem with visibility in other cars I owned, but I have a lot of trouble seeing at night in the Prius especially in the rain. Has anyone replaced the bulb in any way to improve night vision.

    Dave
     
  2. zhenya

    zhenya Active Member

    Joined:
    Sep 6, 2013
    649
    209
    0
    Location:
    Ithaca, NY
    Vehicle:
    2013 Prius Plug-in
    Model:
    Plug-in Base
    Dave,

    There is a thread in the plugin forum right now about this issue.

    There are bulb alternatives, but it appears the primary problem is the excessively low aim from the factory. You can slightly adjust the lights up and see if at helps. If you want more, the H11 low beam can be easily swapped for an H9 with nearly double the output.
     
  3. xliderider

    xliderider Senior Member

    Joined:
    Apr 19, 2012
    7,869
    3,116
    0
    Location:
    Honolulu, HI
    Vehicle:
    2011 Prius
    Model:
    Three
    Lots of threads similar to yours. You can adjust the aim of the lowbeams up as they come aimed pretty low from the factory.

    Many others get aftermarket HID kits to replace the halogen bulbs in the OEM projectors.

    Lastly, some get HID projectors retrofitted into their factory headlight housings.

    SCH-I535
     
    Daddyjeph likes this.
  4. xliderider

    xliderider Senior Member

    Joined:
    Apr 19, 2012
    7,869
    3,116
    0
    Location:
    Honolulu, HI
    Vehicle:
    2011 Prius
    Model:
    Three
    Here's the thread from the plug in forum:

    http://priuschat.com/index.php?posts/1895717[\url] SCH-I535
     
    Daddyjeph likes this.
  5. hsnmz

    hsnmz Junior Member

    Joined:
    Jan 28, 2013
    74
    5
    0
    Location:
    Pakistan
    Vehicle:
    2008 Prius
    Model:
    N/A
    aiming of the lights can be an issue. am glad that my jdm Prius came with a manual dial to adjust the beam hight
     
  6. ataylor2

    ataylor2 Member

    Joined:
    May 30, 2013
    122
    54
    0
    Location:
    East San Francisco Bay Area, CA
    Vehicle:
    2010 Prius
    Model:
    III
    Havent had a chance to do a real good before and after of my HID retrofit, but I think even this shot makes it plain.
    BeforeAfter2.PNG
     
  7. xliderider

    xliderider Senior Member

    Joined:
    Apr 19, 2012
    7,869
    3,116
    0
    Location:
    Honolulu, HI
    Vehicle:
    2011 Prius
    Model:
    Three
    Looks like your aim is too high. The car seems to be in a slightly different position in the two shots, but the cutoff in the oem pic is near the base of the poles with the reflectors. The after shot, who knows where the cutoff is, because it's lighting up the whole other side of the street. That would be painful glare to anyone that's looking in your direction. Also, there is a dark area in front of the car which also suggests the aim is too high.
     
  8. fuzzy1

    fuzzy1 Senior Member

    Joined:
    Feb 26, 2009
    17,317
    10,167
    90
    Location:
    Western Washington
    Vehicle:
    Other Hybrid
    Model:
    N/A
    I have to agree, that second picture looks like it will be blinding oncoming drivers, especially people like me who have aging eyes developing cataracts (surgery is still a long way off).

    But without a centerline reference, I cannot tell if the high light is directly at the oncoming cars where it would be quite bad, or off the right side where it would be more acceptable. A pattern pictured against a flat wall would help.
     
  9. ataylor2

    ataylor2 Member

    Joined:
    May 30, 2013
    122
    54
    0
    Location:
    East San Francisco Bay Area, CA
    Vehicle:
    2010 Prius
    Model:
    III
    I understand you are the HID police and all, but the aim is currently as recommended. At 25 feet the cut off is 33 inches. I will say I did take make a few adjustments over time, so it may be slightly higher in this shot, but nothing over 36 inches.

    Maybe this will help, you can see the light going under the mirror of the car in front of me.

    Wall.jpg
     
  10. xliderider

    xliderider Senior Member

    Joined:
    Apr 19, 2012
    7,869
    3,116
    0
    Location:
    Honolulu, HI
    Vehicle:
    2011 Prius
    Model:
    Three
    Yes, much better. ;)
     
  11. jdk2

    jdk2 Active Member

    Joined:
    Mar 6, 2010
    751
    219
    0
    Location:
    Raleigh, NC
    Vehicle:
    2013 Prius Plug-in
    Model:
    Plug-in Advanced
    Looks good, in my tired eyes :)
     
  12. ataylor2

    ataylor2 Member

    Joined:
    May 30, 2013
    122
    54
    0
    Location:
    East San Francisco Bay Area, CA
    Vehicle:
    2010 Prius
    Model:
    III
    no pattern, but against a wall
    IMG_0986.JPG
     
  13. fuzzy1

    fuzzy1 Senior Member

    Joined:
    Feb 26, 2009
    17,317
    10,167
    90
    Location:
    Western Washington
    Vehicle:
    Other Hybrid
    Model:
    N/A
    The center of my headlamp is about 29.5 inches off the ground. If the cutoff were at 33 inches at 25 feet, that would mean the plane of the cutoff is rising, not falling. I don't believe that is legal in my area. It certainly isn't friendly to oncoming drivers.
     
  14. CdotK

    CdotK Member

    Joined:
    Aug 7, 2013
    376
    46
    0
    Vehicle:
    2013 Prius
    Model:
    Two
    I going to go with the Morimoto xb35(h11b) HID kit -6000K -50w
    should be plenty bight enough for me.
    H11: Morimoto Elite HID System - HID Systems from The Retrofit Source Inc
     
  15. varun singh

    varun singh Member

    Joined:
    Aug 14, 2014
    113
    20
    0
    Location:
    Wayzata
    Vehicle:
    2011 Prius
    Model:
    Four

    Did you get a chance to install 50w HID's from Morimoto, I just ordered one, but little skeptical now regarding heat issues if any on 50w HID kits?
    Would appreciate your reply.