Aftermarket Remote Start w/OEM fob - Video inside.

From the xpresskit website. You create a profile, tell it what you have(drive) and it lists your options. What is applicable to your vehicle, pdf downloads that contain instructions and firmware. Which you need the xbloader to load.

SCH-I545 ?

 

Why would temp effect the remote start of the Prius? No engine to turn over so unless there's an interrupt somewhere due to temp, it shouldn't do anything different. On my truck the remote start tries several times when it's cold just because the RPM's don't go high enough when it first turns over when cold.

 

Does the DBALL allow me to modify the remote proximity unlock so that all doors unlock vs just the driver door?

 

I'm having the same problem. I think all three wires are correctly tapped, but all I get is the seven blinks. Did you ever get this figured out?


iPhone

 

the db-all2 & the tlth2 should work with a 2014, right?
& it's pin 30, not 23?

edit: works. it's pin 30/

 

Would this work for the Prius C?

 

regarding to the xpress site, NO /
but who knows, they might add the prius c in the future/

 

I can't get the firmware to load property and the customer service chat isn't the greatest. Anyone in Virginia that could help with the software/firmware portion?

 

Where in Virginia are you?

 

The first time I flashed it everything went perfectly. Then when I wanted to change the run time I ran into issues. Weirdest thing. Eventually it worked.

Are you on a vm?


iPhone

 

VM= virtual machine? No just a regular PC.

 

Faifax va

 

Will I void my warranty if I tap in to the ecu wire using T connector?

 

I can't imagine it would. I don't have any facts to support that, however.


iPhone

 

Ryankokesh, thanks for the fast response. Sorry for asking too many question. but I just look over the TLTH2 harness diagram on post #10. If I use TLTH2 harness than I do not need to tap into my ecu wiring? I assuming using the TLTH2 harness is a plug n play.

 

Ask away!
I think there's two or three wires you'll still have to tap behind where the fog switch etc is. It greatly reducing tapping, though.


iPhone

 

I ordered my kit and it arrive. The flashing went fairly easy. For safety measure, do I need to disconnect the battery when tapping into the wire?

 

no

BION

 

Hey guy, I just installed db-all2 & the tlth2 on mine 2014 Prius 3, when I hit the lock button three time nothing happen. I check the wire diagram and it is tap correctly. Any one exprience this? I also flash my dball2 using internet explore.

 

obviously you did something wrong /
start from scratch checking ALL the connections /
I did pretty much the same thing as you, but mine worked right away /

BION