1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Programming a new fob

Discussion in 'Gen 4 Prius Main Forum' started by PVAFam, May 26, 2017.

  1. PVAFam

    PVAFam Junior Member

    Joined:
    May 26, 2017
    8
    9
    0
    Location:
    Houston
    Vehicle:
    2016 Prius
    Model:
    Three Touring
    Car only came with one key so I searched around for anyone who said they had done this and didn't find proof, I thought I should post that it's woking fine with a new OEM key and the mini VCI that I got from eBay. Same procedure as some videos on the gen 3 cars. Also setup stuff like the remote window down and all doors unlocking with touching the handle.
     
    bisco likes this.
  2. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    107,571
    48,862
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    congrats and welcome! how did you get a gen 4 with one key?
     
  3. PVAFam

    PVAFam Junior Member

    Joined:
    May 26, 2017
    8
    9
    0
    Location:
    Houston
    Vehicle:
    2016 Prius
    Model:
    Three Touring
    Thanks, it was a repo so I guess they had to make a new key for it, the blade in it wasn't cut at first. Nav SD was missing but got the dealer to give me one of those, still need the little door that covers it. Don't have a cargo cover, did they all come with one?
     
    RCO and bisco like this.
  4. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    107,571
    48,862
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    i think so, did you look under the floor?
     
  5. PVAFam

    PVAFam Junior Member

    Joined:
    May 26, 2017
    8
    9
    0
    Location:
    Houston
    Vehicle:
    2016 Prius
    Model:
    Three Touring
    Yes, there is a spot for a beam in the styrofoam blocks, but no cover.
     
    bisco likes this.
  6. Prodigyplace

    Prodigyplace Senior Member

    Joined:
    Nov 1, 2016
    11,696
    11,317
    0
    Location:
    Central Virginia
    Vehicle:
    2017 Prius
    Model:
    Two
    Welcome.

    I believe your car had the foldable cover that had a wire frame around the edge and comes in a storage bag. There are two hinge mounts behind the rear seat. The hatch end fastens with strings to the hatch and the car so it raises up when the hatch is opened.
     
    PVAFam and RCO like this.
  7. Prodigyplace

    Prodigyplace Senior Member

    Joined:
    Nov 1, 2016
    11,696
    11,317
    0
    Location:
    Central Virginia
    Vehicle:
    2017 Prius
    Model:
    Two
    #7 Prodigyplace, May 27, 2017
    Last edited: May 27, 2017
  8. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    107,571
    48,862
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    the 'visual tables' sticky thread in the gen 4 main forum shows which package gets which cover. looks like they all get one standard, and the 2 gets the 'one piece foldable fabric'.
     
  9. Prodigyplace

    Prodigyplace Senior Member

    Joined:
    Nov 1, 2016
    11,696
    11,317
    0
    Location:
    Central Virginia
    Vehicle:
    2017 Prius
    Model:
    Two
    I must have misread then.
    To be sure behind the back seat does the car have the hooks for the foldable cover or the sockets for the rollup one?

    EDIT I looked again. The way I read the table the 3T and below have the foldable cover. The OP has a 2016 3T.
     
  10. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    107,571
    48,862
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    i wrote foldable?
     
    RCO likes this.