1. Attachments are working again! Check out this thread for more details and to report any other bugs.

2008 Won't start

Discussion in 'Gen 2 Prius Care, Maintenance and Troubleshooting' started by ladydeadpool, Aug 1, 2017.

Page 2 of 2
  1. ladydeadpool

    ladydeadpool New Member

    Joined:
    Aug 1, 2017
    16
    1
    0
    Location:
    USA
    Vehicle:
    2008 Prius
    Model:
    Base
    Okay, I see what you're saying now. I'll double check it and see if it works. Thank you :)
     
    #21 ladydeadpool, Aug 1, 2017
  2. ladydeadpool

    ladydeadpool New Member

    Joined:
    Aug 1, 2017
    16
    1
    0
    Location:
    USA
    Vehicle:
    2008 Prius
    Model:
    Base
    I checked the interlock and it is locked like the diagram shows.
     
    #22 ladydeadpool, Aug 1, 2017
  3. JC91006

    JC91006 Senior Member

    Joined:
    Nov 10, 2013
    16,496
    8,405
    0
    Location:
    Los Angeles, CA
    Vehicle:
    2008 Prius
    Model:
    II
    And still no start? Press the start button twice?
     
    #23 JC91006, Aug 1, 2017
  4. ladydeadpool

    ladydeadpool New Member

    Joined:
    Aug 1, 2017
    16
    1
    0
    Location:
    USA
    Vehicle:
    2008 Prius
    Model:
    Base
    Just the same as I described in #1. No luck :(
     
    #24 ladydeadpool, Aug 1, 2017
  5. JC91006

    JC91006 Senior Member

    Joined:
    Nov 10, 2013
    16,496
    8,405
    0
    Location:
    Los Angeles, CA
    Vehicle:
    2008 Prius
    Model:
    II
    This is very unusual, usually after you disconnect the battery, it'll reset and fault you may have and it'll start. I was pretty sure it was the interlock.....bummer
     
    #25 JC91006, Aug 1, 2017
  6. ladydeadpool

    ladydeadpool New Member

    Joined:
    Aug 1, 2017
    16
    1
    0
    Location:
    USA
    Vehicle:
    2008 Prius
    Model:
    Base
    I agree. I'll have it taken in tomorrow, hopefully it's nothing major. Thank you for all your help!
     
    #26 ladydeadpool, Aug 1, 2017
  7. JC91006

    JC91006 Senior Member

    Joined:
    Nov 10, 2013
    16,496
    8,405
    0
    Location:
    Los Angeles, CA
    Vehicle:
    2008 Prius
    Model:
    II
    You are positive you put the interlock in, flip the lever up, and then press downward to lock it in place?
     
    #27 JC91006, Aug 1, 2017
  8. ladydeadpool

    ladydeadpool New Member

    Joined:
    Aug 1, 2017
    16
    1
    0
    Location:
    USA
    Vehicle:
    2008 Prius
    Model:
    Base
    Yes, I undid the latch and redid it like the diagram showed just to make sure.
     
    #28 ladydeadpool, Aug 1, 2017
  9. Patrick Wong

    Patrick Wong DIY Enthusiast

    Joined:
    Mar 8, 2008
    18,200
    6,479
    0
    Location:
    Green Valley, AZ
    Vehicle:
    2015 Prius
    Model:
    Two
    1. Check the 10A ETCS fuse in the main relay/fuse box next to the inverter (regarding P2118).
    2. P0A4C and P0A4D may point to a failure of the transaxle or a bad wiring harness.
     
    #29 Patrick Wong, Aug 1, 2017
(You must log in or sign up to post here.)
Page 2 of 2