1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Replaced 12v battery on 2011 Prius, now Bluetooth and Radio do not work

Discussion in 'Gen 3 Prius Audio and Electronics' started by Craig Jennings, Aug 14, 2017.

  1. Craig Jennings

    Craig Jennings New Member

    Joined:
    Aug 14, 2017
    6
    0
    0
    Location:
    Bay Area
    Vehicle:
    2011 Prius
    Model:
    Three
    I recently replaced the 12v auxiliary battery on my 2011 Prius. After I installed the battery, the car started up with no issues but now my navigation screen shows "No DVD, Please insert map DVD.

    I am not able to clear this screen. For the last three days I have not been able to use my navigation, Bluetooth, radio and back up camera. All of these items worked prior.

    I have removed the negative battery cable several times, 5 mins, 10 mins and 1 hr and everytime the same screen pops up.

    I have checked all of the fuses and even removed the radio fuse for 10 mins hoping that it would reset the unit but that did not work either.

    Does anyone have any suggestions?
     

    Attached Files:

  2. spiff72

    spiff72 Member

    Joined:
    Jan 25, 2011
    184
    37
    0
    Location:
    West Michigan
    Vehicle:
    2010 Prius
    Model:
    IV
    Might be an obvious question, but did you try ejecting the Nav DVD and reinserting it? Or is ejecting that disc only possible through the menus? (I don't have a factory Nav radio, so don't know how the Nav disc is handled normally).
     
  3. Craig Jennings

    Craig Jennings New Member

    Joined:
    Aug 14, 2017
    6
    0
    0
    Location:
    Bay Area
    Vehicle:
    2011 Prius
    Model:
    Three
    Yes, I did eject the Nav DVD. When I reinsert the DVD, nothing happens. During this process there are no other prompts or menus that pop up.
     
  4. mygel

    mygel Junior Member

    Joined:
    Jul 29, 2017
    46
    24
    0
    Location:
    Slovakia
    Vehicle:
    2010 Prius
    Model:
    III
  5. Craig Jennings

    Craig Jennings New Member

    Joined:
    Aug 14, 2017
    6
    0
    0
    Location:
    Bay Area
    Vehicle:
    2011 Prius
    Model:
    Three
    Yes sir. Pulled the fuse for an hour and put it back in and had the same issue. Thanks for the info on the thread.I saw the same thread when I googled the map DVD problem.
     
  6. Craig Jennings

    Craig Jennings New Member

    Joined:
    Aug 14, 2017
    6
    0
    0
    Location:
    Bay Area
    Vehicle:
    2011 Prius
    Model:
    Three
    Yes sir. Pulled the fuse for an hour and put it back in and had the same issue. Thanks for the info on the thread.I saw the same thread when I googled the map DVD problem.
     
  7. mygel

    mygel Junior Member

    Joined:
    Jul 29, 2017
    46
    24
    0
    Location:
    Slovakia
    Vehicle:
    2010 Prius
    Model:
    III
    Hi there, what about this
     
  8. Craig Jennings

    Craig Jennings New Member

    Joined:
    Aug 14, 2017
    6
    0
    0
    Location:
    Bay Area
    Vehicle:
    2011 Prius
    Model:
    Three
    Thanks for the video. I was not able to access the menu. Not sure what I should check next.
     
  9. NutzAboutBolts

    NutzAboutBolts Senior Member

    Joined:
    Mar 5, 2013
    1,476
    1,552
    0
    Location:
    Bay Area
    Vehicle:
    2012 Prius
    Model:
    Four
    how about buying a disc cleaner at Fry's and insert it in the DVD slot? maybe the laser is too dirty to read the map DVD.
     
  10. mygel

    mygel Junior Member

    Joined:
    Jul 29, 2017
    46
    24
    0
    Location:
    Slovakia
    Vehicle:
    2010 Prius
    Model:
    III
    Found also this one:

    from 1:55
     
    mypriuscious likes this.
  11. mypriuscious

    mypriuscious Member

    Joined:
    Nov 25, 2013
    206
    70
    1
    Location:
    Cincinnati, Ohio
    Vehicle:
    2010 Prius
    Model:
    III
    I am currently dealing with this problem and I have tried all these 'solutions'. Has anyone had this problem and successfully resolved it?

    I should mention that I noticed at one point that my NAV wouldn't load and prior to this happening it said something along the lines of "failure to read nav disc".

    Can a DVD disc go bad?
     
  12. shanecrow99

    shanecrow99 Junior Member

    Joined:
    Aug 14, 2017
    26
    7
    0
    Location:
    77573
    Vehicle:
    2011 Prius
    Model:
    III
    My guess is that the laser has failed in the DVD unit.
     
  13. mypriuscious

    mypriuscious Member

    Joined:
    Nov 25, 2013
    206
    70
    1
    Location:
    Cincinnati, Ohio
    Vehicle:
    2010 Prius
    Model:
    III
    Do you know if anyone has successfully replaced the laser in the radio or do I need to buy a new one?
     
  14. shanecrow99

    shanecrow99 Junior Member

    Joined:
    Aug 14, 2017
    26
    7
    0
    Location:
    77573
    Vehicle:
    2011 Prius
    Model:
    III
    You would do better just buying another DVD NAV unit and installing it. Although, I don't know if there are protections build in to prevent swapping drives from one Prius to another.

    I doubt you could get your hands on the laser assembly for this unit as it would have to be the EXACT same part in order to work.
     
  15. mypriuscious

    mypriuscious Member

    Joined:
    Nov 25, 2013
    206
    70
    1
    Location:
    Cincinnati, Ohio
    Vehicle:
    2010 Prius
    Model:
    III
    In my mind I was over simplifying it to just soldiering a new laser reading and fixing it that way. But yeah, you're right. I just bought a used one. Thanks for the response.
     
  16. shanecrow99

    shanecrow99 Junior Member

    Joined:
    Aug 14, 2017
    26
    7
    0
    Location:
    77573
    Vehicle:
    2011 Prius
    Model:
    III
    Post back up if you get it swapped in. I am curious if it is just a straight swap or if there is some sort of security built into the Prius to prevent it. Good luck!
     
  17. mypriuscious

    mypriuscious Member

    Joined:
    Nov 25, 2013
    206
    70
    1
    Location:
    Cincinnati, Ohio
    Vehicle:
    2010 Prius
    Model:
    III
    It was a very simple procedure. Loosen all the plastic panels and undo 4 bolts around the radio and disconnect all the wires connected to the radio and reverse the process to install the new factory receiver. Took all of 15 minutes and there were no security things to overcome.
     
  18. shanecrow99

    shanecrow99 Junior Member

    Joined:
    Aug 14, 2017
    26
    7
    0
    Location:
    77573
    Vehicle:
    2011 Prius
    Model:
    III
    So does the new unit work with your original Nav DVD?
     
    mypriuscious likes this.
  19. mypriuscious

    mypriuscious Member

    Joined:
    Nov 25, 2013
    206
    70
    1
    Location:
    Cincinnati, Ohio
    Vehicle:
    2010 Prius
    Model:
    III
    I had put a dvd that I knew would work in the original before installed the other and it didn't work as well.
     
  20. Black Prius

    Black Prius Junior Member

    Joined:
    Jun 2, 2018
    15
    2
    0
    Location:
    KoĊ‚obrzeg, Poland
    Vehicle:
    2010 Prius
    Model:
    III
    Has this way worked for someone?
     
  21. Kee

    Kee New Member

    Joined:
    Aug 7, 2018
    1
    0
    0
    Location:
    Los angeles
    Vehicle:
    2010 Prius
    Model:
    Four
    i have the exact same problem yesterday after changing out the 12v battery. have you resolved your problem