1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Removing the protector cap on the J1772 connector

Discussion in 'Prime Plug-in Charging' started by Tickwood, Sep 13, 2019.

  1. Tickwood

    Tickwood Active Member

    Joined:
    Jul 27, 2004
    334
    101
    0
    Location:
    San Diego
    Vehicle:
    2020 Prius Prime
    Model:
    Limited
    Twice already I have tried to close the charging point door with the rubber/plastic protector cap dangling. Is there any real world reason not to just take it off? The connector is still protceted behind the door.
     
  2. jb in NE

    jb in NE Senior Member

    Joined:
    Apr 13, 2018
    2,233
    1,595
    0
    Location:
    Nebraska
    Vehicle:
    2018 Prius Prime
    Model:
    Prime Premium
    The door is not gasketed. Dirt and water can still get in behind the door, and if the connector is open then the connector will get dirty or wet. I would not remove the protective cover from the plug.
     
    TGrracie and jerrymildred like this.
  3. Salamander_King

    Salamander_King Senior Member

    Joined:
    Nov 8, 2015
    10,958
    8,836
    0
    Location:
    New England
    Vehicle:
    Other Hybrid
    Model:
    N/A
    I wonder what Japanese version of PRIME (Prius PHV) have in the charge port. As I understand, Japanese Prius PHV has CHAdeMO port at where the North American version of PRIME use as cap holder (arrow in the diagram). Do they have two separate caps for both J1772 and CHAdeMO connectors and no placeholders?

    charge port.png
     
  4. Salamander_King

    Salamander_King Senior Member

    Joined:
    Nov 8, 2015
    10,958
    8,836
    0
    Location:
    New England
    Vehicle:
    Other Hybrid
    Model:
    N/A
    I found the answer. This photo from Japanese Toyota site shows two separate protector caps.

    charge port japan.png
     
    jerrymildred likes this.
  5. CharlesH

    CharlesH CA HOV Decal #5 on former PiP

    Joined:
    Nov 27, 2005
    2,783
    1,151
    0
    Location:
    Roseville, CA
    Vehicle:
    2017 Prius Prime
    Model:
    Prime Advanced
    Too bad that they couldn't just build the cover into the door, like they for the PiP (2012-2015 PlugIn Prius). All you had to do was shut the charging port door, and the protective cover went into place.
     
  6. jerrymildred

    jerrymildred Senior Member

    Joined:
    Oct 28, 2016
    11,490
    14,095
    0
    Location:
    Tampa, FL
    Vehicle:
    2017 Prius
    Model:
    Two
    It almost seems like the engineers looked at it and decided it was way too convenient, so they changed it to something more complex. "It it ain't broke ... hurry up and break it!!" :confused:
     
  7. walterm

    walterm Active Member

    Joined:
    May 17, 2007
    466
    202
    34
    Location:
    NJ
    Vehicle:
    2022 Prius Prime
    Model:
    Limited
    No, the engineer's slogan is "If it ain't broke, open it up and fix it!"
     
    noonm and jerrymildred like this.
  8. noonm

    noonm Senior Member

    Joined:
    Feb 5, 2019
    575
    595
    0
    Location:
    NJ
    Vehicle:
    2018 Prius Prime
    Model:
    Prime Plus
    I believe we call that "job security" :)

    As one who occasionally charges outside in the rain/snow, I do prefer the door to not be water tight so it will dry out after I close it.
     
  9. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    107,571
    48,862
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    pip door isn't watertight, the plug cover is attached to it, and protects the plug when you close the door. simple, and elegant
     
    jerrymildred and noonm like this.
  10. vvillovv

    vvillovv Senior Member

    Joined:
    Mar 19, 2013
    3,493
    1,231
    1
    Location:
    NY
    Vehicle:
    2017 Prius Prime
    Model:
    Prime Plus
    Does protective cap consistently fall out of its holder and dangle on your car
    I've had a hard time getting that damned cap to stay in there once or twice and that is frustrating enough for me.
     
  11. john1701a

    john1701a Prius Guru

    Joined:
    Jan 6, 2004
    12,747
    5,243
    57
    Location:
    Minnesota
    Vehicle:
    2017 Prius Prime
    Model:
    Prime Advanced
    Nope. The trick is to just turn it a little. That tightens the grip.




    Exactly! I've had mine covered in a blanket of snow quite a number of times. It dries out fine.
     
    vvillovv and jb in NE like this.
  12. jb in NE

    jb in NE Senior Member

    Joined:
    Apr 13, 2018
    2,233
    1,595
    0
    Location:
    Nebraska
    Vehicle:
    2018 Prius Prime
    Model:
    Prime Premium
    Thanks. Good tip.
     
  13. jerrymildred

    jerrymildred Senior Member

    Joined:
    Oct 28, 2016
    11,490
    14,095
    0
    Location:
    Tampa, FL
    Vehicle:
    2017 Prius
    Model:
    Two
    Interesting. Mine just stays. No special technique required. In fact, it takes a little tug to pull it out and makes a small squawk.

    Then again, I don't think mine ever got used till I bought the car in March this year. Maybe a wear issue? Did yours come loose when new?

    But I can't help wondering whether it would be possible to find a PiP charging door and retrofit that inner panel to the Prime's door. I haven't looked because I don't imagine there are very many PiPs in the junk yards yet.
     
    Prius from Dad likes this.
  14. jerrymildred

    jerrymildred Senior Member

    Joined:
    Oct 28, 2016
    11,490
    14,095
    0
    Location:
    Tampa, FL
    Vehicle:
    2017 Prius
    Model:
    Two
    I can't count the number of times I've done that myself!! :ROFLMAO::ROFLMAO::ROFLMAO:
     
    Mendel Leisk likes this.
  15. Dennis_MA

    Dennis_MA Active Member

    Joined:
    Jul 20, 2012
    185
    109
    0
    Location:
    Amherst, MA
    Vehicle:
    Other Electric Vehicle
    Model:
    N/A
    No problem with the cap here. I pretty much charge every day and the cap fits fine in the holder while charging. Very rarely does it come out. Usually my fault for not fitting it correctly in the holder.
     
    jerrymildred likes this.
  16. vvillovv

    vvillovv Senior Member

    Joined:
    Mar 19, 2013
    3,493
    1,231
    1
    Location:
    NY
    Vehicle:
    2017 Prius Prime
    Model:
    Prime Plus
    Once or twice on a dark cold snowy night I've had issues with that cap staying in it holder. Maybe the night light in the charge well was obscured by snow or something like that, I don't really remember all the details.
    I have been frustrated when pushing the on button only to see the notice on the MID that the charge door is open. Usually when I'm late besides.
     
  17. Tha_Ape

    Tha_Ape Active Member

    Joined:
    Apr 9, 2019
    271
    161
    0
    Location:
    Washington, DC
    Vehicle:
    2017 Prius Prime
    Model:
    Plug-in Advanced
    Is it possible to buy the Japanese charger and install it in a US prime (and have it work)?
     
  18. Salamander_King

    Salamander_King Senior Member

    Joined:
    Nov 8, 2015
    10,958
    8,836
    0
    Location:
    New England
    Vehicle:
    Other Hybrid
    Model:
    N/A
    If you are thinking of CHAdeMO, then the answer is simply NO.
     
  19. patcoghm

    patcoghm Junior Member

    Joined:
    Feb 13, 2006
    57
    18
    0
     

    Attached Files:

  20. Billy sharpstick

    Billy sharpstick Junior Member

    Joined:
    Jul 12, 2019
    21
    8
    0
    Location:
    Micanopy FL USA
    Vehicle:
    2019 Prius Prime
    Model:
    Prime Premium
    It would have been so simple to just engineer a rubber gasket all around the door.