car wont start-all dash lights on-please help

Discussion in 'Gen 3 Prius Care, Maintenance & Troubleshooting' started by Seymour1, Oct 6, 2025 at 10:22 AM.

  1. Seymour1

    Seymour1 Member

    Joined:
    Feb 8, 2024
    263
    29
    0
    Location:
    22967
    Vehicle:
    2010 Prius
    Model:
    Three
    yes, I did
     
  2. ChapmanF

    ChapmanF Senior Member

    Joined:
    Mar 30, 2008
    27,181
    17,831
    0
    Location:
    Indiana, USA
    Vehicle:
    2010 Prius
    Model:
    IV
    What it is is this, inside the inverter assembly:

    [​IMG]

    But you haven't reported any trouble codes that implicate the IPM to me.

    When saying "I found a post that describes my problem", it can be super helpful to include a link to the post that you found, and also point out what specifically you saw in that post's problem description that led you to think it was describing the same problem you have.

    Based on the trouble codes you've reported, I suspect an IPM post that you found is likely a distraction.

    Also, just to make sure none of us missed any news, maybe it's a good time to again post exactly what trouble codes your car reports now.
     
    Brian1954 likes this.
  3. Seymour1

    Seymour1 Member

    Joined:
    Feb 8, 2024
    263
    29
    0
    Location:
    22967
    Vehicle:
    2010 Prius
    Model:
    Three
    Maybe I read a post with incorrect info. I did find a schematic that I can use to trace down the true meaning of the code. 2025-10-06_20-21-21.jpg 2025-10-06_20-21-21.jpg
     
  4. ChapmanF

    ChapmanF Senior Member

    Joined:
    Mar 30, 2008
    27,181
    17,831
    0
    Location:
    Indiana, USA
    Vehicle:
    2010 Prius
    Model:
    IV
  5. Seymour1

    Seymour1 Member

    Joined:
    Feb 8, 2024
    263
    29
    0
    Location:
    22967
    Vehicle:
    2010 Prius
    Model:
    Three
    Chapman, The simplified electrical diagram of the interlock circuit did not work for me. I did not understand, "frame wire" and it left out some connectors for simplicity. And I did not know which connector was A59, or pin 36. The wire colors were not shown. I do not know where the power management control ECU is. I decided to have a tow truck come to get it.
    But, thanks for your help!
     
  6. ChapmanF

    ChapmanF Senior Member

    Joined:
    Mar 30, 2008
    27,181
    17,831
    0
    Location:
    Indiana, USA
    Vehicle:
    2010 Prius
    Model:
    IV
    I'm sorry to hear that. Yeah, the unsimplified wiring diagram has all that information.

    Toyota Service Information and Where To Find It | PriusChat

    The online version is especially cool: you can just click a part of the circuit and the whole circuit is highlighted and you can follow it around.
     
  7. Seymour1

    Seymour1 Member

    Joined:
    Feb 8, 2024
    263
    29
    0
    Location:
    22967
    Vehicle:
    2010 Prius
    Model:
    Three
    WOW! Cool
     
  8. Seymour1

    Seymour1 Member

    Joined:
    Feb 8, 2024
    263
    29
    0
    Location:
    22967
    Vehicle:
    2010 Prius
    Model:
    Three
    Hey, Chapman----good news. I had the car towed to the Toyota dealer ($200). They found a bad IPM. The original warrenty had just run out but it was extended until 2030. My car is a 2010 model. The fix was done under warrenty. It would have cost me $2800 for them to fix it not under warrenty. The main part was $2100.
     
  9. Brian1954

    Brian1954 Senior Member

    Joined:
    Jan 31, 2021
    2,040
    794
    0
    Location:
    South Central PA, USA
    Vehicle:
    2011 Prius
    Model:
    III
    The car must have had other active trouble codes than what you listed in this thread to qualify for the warranty. Check the paperwork that you received, and please report any trouble codes that are listed on the paperwork.

    By the way, since your car qualified for the warranty coverage, the cost of towing the car to the dealership is also covered. Talk to the dealership about being reimbursed for the cost of the towing.