Help! Harness needed if you are parting out a Plug in Prius

Discussion in 'Gen 1 Prius Plug-in 2012-2015' started by ericbecky, May 21, 2026 at 9:33 AM.

  1. ericbecky

    ericbecky Hybrid Battery Hero

    Joined:
    Mar 12, 2004
    4,449
    3,354
    1
    Location:
    Madison, Wisconsin
    Vehicle:
    2005 Prius
    Model:
    Two
    Help!
    I need to buy a specific section of wire harness from a Plug-in Prius (2012-2015).

    If you are parting out a Plug-in Prius, you may have this laying in the back. Or possibly still attached to the battery case or charge controller?

    Call or message me to discuss. 608-729-4082. I'm in Wisconsin.

    I'd prefer as much of the harness as possible. But we can sort that out.
    20260519_105750~2.jpg

    I took off the wire loom of one section, and had to repair/tape up a different section, so mine may look slightly different than yours.

    20260519_105649~2.jpg
     
    #1 ericbecky, May 21, 2026 at 9:33 AM
  2. PriusCamper

    PriusCamper Senior Member

    Joined:
    Mar 3, 2012
    13,240
    5,357
    0
    Location:
    Pacific Northwest, USA
    Vehicle:
    2007 Prius
    Model:
    Two
    I just gave Jack a heads-up about this... Maybe he'll have something or know where to search?
     
    #2 PriusCamper, May 21, 2026 at 2:06 PM
    bisco likes this.
  3. ericbecky

    ericbecky Hybrid Battery Hero

    Joined:
    Mar 12, 2004
    4,449
    3,354
    1
    Location:
    Madison, Wisconsin
    Vehicle:
    2005 Prius
    Model:
    Two
    I talked with him yesterday. He doesn't have what I need. But will ping me if something comes on his radar. He had some good advice as well.
     
    #3 ericbecky, May 21, 2026 at 9:25 PM
    PriusCamper likes this.
  4. PriusCamper

    PriusCamper Senior Member

    Joined:
    Mar 3, 2012
    13,240
    5,357
    0
    Location:
    Pacific Northwest, USA
    Vehicle:
    2007 Prius
    Model:
    Two
    These first plugin Prius are very rare... I wish @bisco had sold his to me!
     
    #4 PriusCamper, May 21, 2026 at 11:07 PM
  5. ericbecky

    ericbecky Hybrid Battery Hero

    Joined:
    Mar 12, 2004
    4,449
    3,354
    1
    Location:
    Madison, Wisconsin
    Vehicle:
    2005 Prius
    Model:
    Two
    With it being rare it can be a pain to find certain PIP-only parts.

    It's hard to filter through all the regular ads just to find the Plugin parts.

    Practicing my skills on a similar connector.
    20260521_100120.jpg
     
    #5 ericbecky, May 22, 2026 at 8:30 AM
  6. PriusCamper

    PriusCamper Senior Member

    Joined:
    Mar 3, 2012
    13,240
    5,357
    0
    Location:
    Pacific Northwest, USA
    Vehicle:
    2007 Prius
    Model:
    Two
    I'm surprised no one has designed a universal plug where you stack the number of wires you need together to form the correct shaped plug. Suspect 3D printer owners have experimented with printing their own plugs... Of course in general making a specific shaped plug is super expensive when it comes to building the tooling to make the plastic pieces. For example it cost ACENbay.com more that $10K to have tolling made so he could manufacture his own voltage sensing harness that plugs into the ECM.
     
    #6 PriusCamper, May 22, 2026 at 5:27 PM
(You must log in or sign up to post here.)