Rear wheel speed sensor replacement

Discussion in 'Gen 3 Prius Care, Maintenance & Troubleshooting' started by NicoB, Jun 24, 2026 at 5:07 PM.

Tags:
  1. NicoB

    NicoB New Member

    Joined:
    Wednesday
    2
    0
    0
    Location:
    Erie County, PA
    Vehicle:
    2010 Prius
    Model:
    Three
    This topic is most likely already posted. If so, please redirect me.

    I have Code C0210 indicating failure of the right rear wheel speed sensor. The bearing is fine, so I don't really need to replace the whole wheel bearing & hub assembly... just the wheel speed sensor. I can't seem to source the sensor only for the 2010-2015 gen vehicle, but I can for the prior gen on PartsGeek and Amazon, and it seems like the same part, Will this part fit on my 2010 model?

    Thanks!
    Screen Shot 2026-06-24 at 5.05.02 PM.png Screen Shot 2026-06-24 at 5.06.54 PM.png
     
    #1 NicoB, Jun 24, 2026 at 5:07 PM
  2. rjparker

    rjparker Tu Humilde Sirviente

    Joined:
    Jun 6, 2008
    10,902
    6,844
    7
    Location:
    Texas Hill Country
    Vehicle:
    2012 Prius v wagon
    Model:
    Three
    You have to replace the whole hub

    This is the part number for my Prius v
    Toyota OEM vs Timken Rear Hub Bearings.jpeg
     
    #2 rjparker, Jun 24, 2026 at 10:21 PM
  3. NicoB

    NicoB New Member

    Joined:
    Wednesday
    2
    0
    0
    Location:
    Erie County, PA
    Vehicle:
    2010 Prius
    Model:
    Three
    Thanks. OEM & Timkin are a bit over my budget. Do you know anything about the quality of Detroit Axle parts?
     
    #3 NicoB, Jun 25, 2026 at 1:19 PM
  4. rjparker

    rjparker Tu Humilde Sirviente

    Joined:
    Jun 6, 2008
    10,902
    6,844
    7
    Location:
    Texas Hill Country
    Vehicle:
    2012 Prius v wagon
    Model:
    Three
    Lots of the aftermarket hubs only last a couple of years.

    Its a gamble.
     
    #4 rjparker, Jun 25, 2026 at 7:39 PM
  5. cdherman

    cdherman Member

    Joined:
    Sep 25, 2011
    67
    26
    0
    Location:
    Kansas City
    Vehicle:
    2011 Prius
    Model:
    Two
    Agree with RJParker. You gets what you pays for, at least in this instance.......
     
    #5 cdherman, Jun 27, 2026 at 6:54 PM
  6. ASRDogman

    ASRDogman Senior Member

    Joined:
    May 29, 2018
    7,993
    4,056
    0
    Location:
    Florida
    Vehicle:
    2010 Prius
    Model:
    Two
    They are junk.
    Moog worked good for me. Just make sure you get the ones made in AMERICA.
    Other country ones are junk. They was an article I read a few years ago I wished I had saved
    that did quality tests from the different country they are made in and the USA ones were much
    better quality.

     
    #6 ASRDogman, Jun 27, 2026 at 9:02 PM
(You must log in or sign up to post here.)