1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Stump the Chump!

Discussion in 'Gen 2 Prius Main Forum' started by ZC1, Jun 6, 2008.

Page 8 of 17
  1. ZC1

    ZC1 Junior Prius Owner

    Joined:
    Apr 18, 2008
    711
    13
    0
    Location:
    Metro Detroit
    Vehicle:
    2008 Prius
    Location: On top of the fuel tank
    Purpose: EVAP purge line (connects to the Purge flow switching valve)
     
    #141 ZC1, Jun 23, 2008
  2. Patrick Wong

    Patrick Wong DIY Enthusiast

    Joined:
    Mar 8, 2008
    18,200
    6,471
    0
    Location:
    Green Valley, AZ
    Vehicle:
    2015 Prius
    Model:
    Two
    Hi Galaxee,

    Your DH's fuel tank dissection efforts and photos are well known throughout the various Prius online communities! I studied them closely in the past when I was a PriusChat lurker. The Hybrid13 Fuel and EVAP System.pdf file stored at autoshop101.com is also a good reference document.

    If your challenge referred to the short rubber hose that is secured with two cheap hose clamps, then it appears that the hose is attached to the charcoal canister. Please see the second page of the attached exploded parts diagram; note the drawing of the charcoal canister located on the right side of the page, and see the rubber tube with the cheap hose clamp.

    Hi ZC1,

    Well, the official name of the unit is the Brake Control Power Supply Assembly. The name may be misleading, but it is what it is. See attached page for more info.
     
    #142 Patrick Wong, Jun 23, 2008
  3. patsparks

    patsparks An Aussie perspective

    Joined:
    Jul 12, 2007
    10,664
    567
    0
    Location:
    Adelaide South Australia
    Vehicle:
    2004 Prius
    Model:
    N/A
    Sort of global this interweb thingy, even Aussies if they pedal hard enough <reference to flying doctor radios used it the outback before power was available> can see some of the stuff on it.
     
    #143 patsparks, Jun 23, 2008
  4. galaxee

    galaxee mostly benevolent

    Joined:
    Mar 14, 2005
    9,810
    465
    0
    Location:
    MD
    Vehicle:
    2005 Prius
    you know there are lots of short rubber hoses in that area that are secured with two cheap hose clamps. ;) the hose in the picture is not the same one as the hose you refer to in the pdf.

    in that case, the location is also wrong. i incorrectly interpreted your response. and i gave a big hint away in the process.

    lol... ok so i should have worded that a little better. :p
     
    #144 galaxee, Jun 23, 2008
  5. Patrick Wong

    Patrick Wong DIY Enthusiast

    Joined:
    Mar 8, 2008
    18,200
    6,471
    0
    Location:
    Green Valley, AZ
    Vehicle:
    2015 Prius
    Model:
    Two
    OK then...
    Location: Inside the fuel tank, on top of the bladder
    Purpose: Pipe that connects bladder to fuel pump/fuel level sending unit
     
    #145 Patrick Wong, Jun 23, 2008
  6. galaxee

    galaxee mostly benevolent

    Joined:
    Mar 14, 2005
    9,810
    465
    0
    Location:
    MD
    Vehicle:
    2005 Prius
    location now precisely correct.
    purpose incorrect.
     
    #146 galaxee, Jun 23, 2008
  7. Patrick Wong

    Patrick Wong DIY Enthusiast

    Joined:
    Mar 8, 2008
    18,200
    6,471
    0
    Location:
    Green Valley, AZ
    Vehicle:
    2015 Prius
    Model:
    Two
    Location: Inside the fuel tank, on top of the bladder
    Purpose: Pipe that provides fuel pumped by the fuel pump, to the metal nipple mounted on the tank's exterior
     
    #147 Patrick Wong, Jun 23, 2008
  8. galaxee

    galaxee mostly benevolent

    Joined:
    Mar 14, 2005
    9,810
    465
    0
    Location:
    MD
    Vehicle:
    2005 Prius
    clue:

    no liquid-phase substance should be inside this line.
     
    #148 galaxee, Jun 23, 2008
  9. Patrick Wong

    Patrick Wong DIY Enthusiast

    Joined:
    Mar 8, 2008
    18,200
    6,471
    0
    Location:
    Green Valley, AZ
    Vehicle:
    2015 Prius
    Model:
    Two
    Sigh...

    Location: Inside the fuel tank, on top of the bladder
    Purpose: Pipe that facilitates flow of fresh air into space between bladder and fuel tank shell
     
    #149 Patrick Wong, Jun 23, 2008
  10. ZC1

    ZC1 Junior Prius Owner

    Joined:
    Apr 18, 2008
    711
    13
    0
    Location:
    Metro Detroit
    Vehicle:
    2008 Prius
    Edited post, .......because we are and have been having problems with accessing and posting to this supposedly new site.
    sigh...
    check my next post for the real entry...


    ZC1
     
    #150 ZC1, Jun 23, 2008
  11. ZC1

    ZC1 Junior Prius Owner

    Joined:
    Apr 18, 2008
    711
    13
    0
    Location:
    Metro Detroit
    Vehicle:
    2008 Prius
    Are the following documents not acceptable?
    Check page 6-6 of the brake Toyota training document and page 5-11 of the chassis Toyota Training document.

    In both documents, it is called the Power control backup unit
    and
    if that is it's purpose and actual function, then I'd perfer the correct naming structure and usage, despite one replacement page shortening the name or overlooking the proper name.

    I'm open to correction, anyway.
    :D

    ZC1
     

    Attached Files:

    #151 ZC1, Jun 23, 2008
  12. ZC1

    ZC1 Junior Prius Owner

    Joined:
    Apr 18, 2008
    711
    13
    0
    Location:
    Metro Detroit
    Vehicle:
    2008 Prius
    Darn it Pat, quit guessing so much...
    That was my next guess.....errr... answer
    if the EVAP line wasn't accepted.
    :D

    ZC1
     
    #152 ZC1, Jun 23, 2008
  13. galaxee

    galaxee mostly benevolent

    Joined:
    Mar 14, 2005
    9,810
    465
    0
    Location:
    MD
    Vehicle:
    2005 Prius
    next clue:

    look carefully at what it connects to on the right side of the picture. not many connections to that part- narrows down the field a LOT.

    ZC1 is on the right track but did not give the right destination.
     
    #153 galaxee, Jun 23, 2008
  14. ZC1

    ZC1 Junior Prius Owner

    Joined:
    Apr 18, 2008
    711
    13
    0
    Location:
    Metro Detroit
    Vehicle:
    2008 Prius
    Location: On top of the fuel tank
    Purpose: EVAP purge line (connects to the Charcoal cannister)

    ZC1
     
    #154 ZC1, Jun 24, 2008
  15. ZC1

    ZC1 Junior Prius Owner

    Joined:
    Apr 18, 2008
    711
    13
    0
    Location:
    Metro Detroit
    Vehicle:
    2008 Prius
    Correction: According to the document I have the EVAP does not connect to the Charcoal cannister.

    Location: On top of the fuel tank
    Purpose: EVAP purge line (connects to fuel tank level thingy)

    ZC1
     
    #155 ZC1, Jun 24, 2008
  16. patsparks

    patsparks An Aussie perspective

    Joined:
    Jul 12, 2007
    10,664
    567
    0
    Location:
    Adelaide South Australia
    Vehicle:
    2004 Prius
    Model:
    N/A
    My guess
    Location: - inside steel casing of fuel tank left side.
    Purpose: - allow fuel vapour to escape to the filler neck when refueling.
     
    #156 patsparks, Jun 24, 2008
  17. galaxee

    galaxee mostly benevolent

    Joined:
    Mar 14, 2005
    9,810
    465
    0
    Location:
    MD
    Vehicle:
    2005 Prius
    location inside fuel tank housing above bladder is correct.
    it is indeed one of the evap lines.

    next clue: it comes from the white box on the right side of the pic- which is the sub-tank assy that contains the fuel pump.
    if you have the diagram of the fuel system, and read previous answers, this will rule out all other possibilities.
     
    #157 galaxee, Jun 24, 2008
  18. ZC1

    ZC1 Junior Prius Owner

    Joined:
    Apr 18, 2008
    711
    13
    0
    Location:
    Metro Detroit
    Vehicle:
    2008 Prius
    Location: Inside the fuel tank
    Purpose: EVAP purge line (connects to fuel tank level thingy, also known as the fuel pump)

    (The documents/photos I'm looking at don't seem to be consistent and show what seems to be an older style of fuel tank. Oh well...)
     
    #158 ZC1, Jun 24, 2008
  19. Patrick Wong

    Patrick Wong DIY Enthusiast

    Joined:
    Mar 8, 2008
    18,200
    6,471
    0
    Location:
    Green Valley, AZ
    Vehicle:
    2015 Prius
    Model:
    Two
    Location: Inside the fuel tank, on top of the bladder
    Purpose: Recirculation line from fuel pump assembly to entrance of fuel filler tube.
     
    #159 Patrick Wong, Jun 24, 2008
  20. patsparks

    patsparks An Aussie perspective

    Joined:
    Jul 12, 2007
    10,664
    567
    0
    Location:
    Adelaide South Australia
    Vehicle:
    2004 Prius
    Model:
    N/A
    Inside the fuel tank steel housing
    takes vapor to the VSV for CCV
     
    #160 patsparks, Jun 24, 2008
(You must log in or sign up to post here.)
Page 8 of 17