Separate names with a comma.
What do these codes tell me? Anything else I can do with a Techstream to explore some more possibilities? [ATTACH]
I bought a set of remanufactured fuel injectors and each one measures more than 14.4 ohm. I'm assuming they are all no good...?
So I took the car to a mechanic that actually seemed to know what he's doing and he said it seems the water pump is failing - not leaking as far...
So for the recent few months car has been driving more or less fine, with no obvious misfires or any check engine lights at all - though I...
The oil is actually wet... would piston ring or valve stem seal replacement qualify as an "engine overhaul?"
Did your misfire go away after replacing injectors?
So I was lucky enough to pass the smog inspection today. I haven't had misfires in over 80 miles (I believe that the emmissions readiness happened...
So I just pulled spark plug #3. it was covered in some sort of liquid - smelled liked gas/oil. I wiped it off and stuck it back in, then pulled...
Thanks! for $25 I can surely go for replacing the injectors. Let me know how well these work for you once you install them. As an aside, I have...
so acc to this mode 6, its primarily cyl 3 that is misfiring - other cylinders misfire less than 1% as much = a few times per drive. This would...
So apparently there is somethign called Mode $06 testing in my torque app - and doing some quick reading it seems that it will give me more...
how do I check fuel pressure? is there any way to reliably do so via the obd torque app? Here is some data logged by the app on my last trip:...
compression test was done about 6 months ago. I'm skeptical about results as I can't say the tester was good (see previous posts) and it did...
Yup - I cleaned them really well before putting them back in - with q-tips & everything. The funny thing is that coil #3 was clean, and coil #4...
So after swapping coil 3 & 4, it shows pending codes for cyl 1 & 3 (as before) in addition to the p0300 random misfire. Since it seems to not be...
