Separate names with a comma.
Attachments are working again! Check out this thread for more details and to report any other bugs.
Hello all, Pretty uneventful update. I ended up taking it to the dealer and authorize them two hours to start to diagnose. They burn through...
I didn't know a printed manual existed until I saw your pictures. I thought everything was only on TIS. Ordered from amazon already!
It's dark so I am not messing with it right now, but is the AM1 in the fuse box under the hood or the small junction box to the left of the...
Capacitance might have been the wrong term sorry, there was resistance(?) of around 60ish when I tested continuity. I am trying to see if I had a...
New start button did nothing, as expected. I checked some of the relays, all had capacitance across their coils. I am still unsure with the...
I will have to get one to my car, however I am trying currently to track down the ST relay. Not sure where that is in this car :/
No warning lights... Just the normal ones, when the car "sees" the key, door open, turn signals when the car door is locked, headlights, etc....
dash lights, door lights, etc. Every light but the push button light. And lights associated directly with starting the vehicle.
The car doesn’t seem unhappy with anything. I have checked the valet button as well. The dash recognizes the key, and other lights come on as...
Well, I found it’s home but no change to my situation. I am going to keep checking every connection. I’m sure now that I must have missed...
TMR-JWAP, I have found those grounds, and they appear to be plugged in. HOWEVER, I believe I found my offensive cable. It was tucked back away...
This is awesome. Definitely something to check out. And thanks for the junction box tip! By the way....paper book?!?! From where? Do you...
Ok, if I am reading it correctly(grain of salt!), I am pretty sure the actual push button is operating normally. And we have hot black, so that...
Ok so push button findings are going to be listed with appropriate pin to wire color. With the button NOT pushed in, there is zero continuity...
Ok so from my left to right, these are the wires I have. Green, yellow, black and white(one wire), black, red, free space, green again, and...
