Separate names with a comma.
Attachments are working again! Check out this thread for more details and to report any other bugs.
I tried hunting for other people who mentioned this in other threads but had no luck. In the last couple of months I have noticed my '10 Prius III...
the holes in the plastic fairing that is.
The original tow loop will have to be removed but seeing as you'd have a hitch installed that won't be a problem. The holes dont look like the...
You'll laugh but I torqued the four bolts on mine with a bathroom scale and a 2 foot cheater bar, torqued to 32.5 lbs being that the arm was 2...
If you go to suspensionconnection.com and look up the Quality S 2" hitch everyone seems so interested in you can look of the manufacturer's specs...
The panels and trim that need to be removed to do this install cleanly.
This is where the aforementioned black wire connects at the drivers left knee panel.
Foam tape forward end at the windshield.
Foam tape aft end of ceiling panel (map light and microphone panel removed)
Drivers side pillar with the wire and conduit installed be sure to route the wire behind and away from where the airbag would deploy, this isn't...
Drivers left knee area where the mirror switch is, that panel was removed. The red connector you see has the black wire from the harness run from...
Drivers side sunvisor, relatively easy to remove just be sure to get both metal clips out of the headliner, you can see one missing on the end I'm...
The SRS airbag on the drivers pillar, this clip is easy to rotate but like the instructions say do not damage this clip. If it is damaged replace...
Drivers side area with most panels removed and door seal peeled down
