Separate names with a comma.
Attachments are working again! Check out this thread for more details and to report any other bugs.
The radiator replacement is done. I want to share my experience. Hopefully, someone finds this useful. It took 4 days. It is not difficult, but...
Thanks a lot! This is very helpful.
I have a 2013 Prius C. My engine coolant is leaking. I lose about a quart in 1 week in expansion tank. There is always a puddle on the bottom...
I opened the sensor. Here are the photos. The sensor cover (rectangular piece inside) looks good, but I noticed a streak of rust going down from...
How do I know if the bearing is good or bad? It has no free play. The wheel did not move at all when I pushed it 3-9 and 6-12 o'clock. I can...
Thank you! I got it out. I used a long bolt and a nut of a size slightly larger than the holes in the rotor. I put the nut behind the rotor,...
Thank you! I pulled it out. But it came out together with the back plate! What do I do now? It is hanging on the brake line and parking cable. I...
Thank you! I am trying to remove the hub. I took 4 bolts out (through holes) and presoaked the seam with penetrating oil. I have a 2-jaw pulley...
I still need help with this. I cleared the codes and the problem "went away" until yesterday, when skid light started to flash again at random...
Just an update that I was able to reprogram TPMS IDs on this car with VXDIAG VCX Nano.
I wanted to check IG1, IG2, BS1 voltages while the car acts normal, but since I cleared the codes I don't have snowflakes anymore. The Data List...
You are right. Thanks. The BS (pin 15) goes to 20A ABS Main No. 1 fuse and then to the battery. Zero BS1 voltage suggests that either fuse of the...
You have much more experience than I do in looking at these diagnostics charts. Thank you for helping me. I only have wiring diagram for Gen 3,...
Here are the relevant pages from the manual with the DTC detection conditions. A41 connector is on page 3 of C1311.pdf. It is the same connector...
