Separate names with a comma.
Attachments are working again! Check out this thread for more details and to report any other bugs.
The Blue Driver reads and resets Prius brake codes. I had all the brake warnings come on 4 years ago twice on really cold damp winter days....
Thats great footage, thanks for taking the time to do that. I had a very similar problem with mine that ended up being play in the front...
are you sure it is on backwards? I don't think they would get the rotor on if it was, or it would contact everywhere. Even when they are on the...
Pretty much all of the gen 2s in my area have this rust problem at the rear of the rocker panel. They put salt on the roads here and I live...
That's a pretty common sight on Gen 2s in my area and nowhere near the worst I have seen. It happened to our 2005 and we had it fixed for about...
I doubt the rims are your problem. I have used original equipment 6 spoke aluminum rims as winter rims for 10 years. A lot of the paint has...
With a low oil drain pan you can actually change the oil without lifting the car up. The pan bolt and the oil filter are within easy reach if...
I'm not sure why you would assume I don't DIY, because thats pretty condescending and you are actually wrong. Just because I don't want to...
Not even sure about Timken or SKF anymore. Both used to supply the actual OEM "Koyo" wheel bearing, but now both supply bearings made in China...
I have a 2006 and a 2008 Prius currently. The 2006 is getting to the point that we need to replace it. It actually has no major problems, but...
I have a blue driver and it works fine for routine codes. I don't know about the hybrid codes because I have never had a problem with the hybrid...
I would look on Kijiji or whatever you have locally. I recently picked up a set of 4 mint 15 inch six spokes with covers and almost new summer...
Did you torque the control arm bolts with the suspension loaded? If you don't do this you will likely get a clunk and play in the front control...
I don't see your picture, but you could splice the wire. You don't have much to loose. It will either work or it won't. I have spliced one (not...
