Separate names with a comma.
Attachments are working again! Check out this thread for more details and to report any other bugs.
You can replace it yourself. Go out and buy a CR1632 battery (or equivalent). Remove the metal key and use the tip to pop open the fob. (There's a...
We've been away for more than two weeks and we've never had a problem. I've heard the stories of people who've gone away and come back to find...
I've been using Yakima Q-Towers with my 2010 Prius (with solar roof). It seems to work just fine. The only drawback that I've seen is that putting...
The OP did say that if anyone wanted details, they could e-mail him...
I recently left my 2010 Prius sitting for 22 days. No problem.
So instead of dedicated snow tires, you have a dedicated car... ;) In all the years that I lived in the mountains of Colorado, I never owned a...
Our experience is that your local dealer is the last place you want to go for an SKS fob or a laser cut key. We lost one of our fobs about a...
Hmmm...it sounds like I have been lucky then. In my ignorance, I have jump started my wife's car on a couple of occasions (battery was going bad...
As it happens, the oil change notice just turned on for my car. I had thought that I had overridden the 5K interval setting via the maintenance...
It would not surprise me if the SKS could interfere with a pacemaker under the right conditions. I know that a digital cellphone (which is all of...
I can't say for certain because I don't have the specific details in this case, but I'd bet the concern is not so much the strength of the RF...
It seems backwards to me, as well. My initial inclination was to push the knob forward to go forward and pull the knob backwards to go backwards....
Most LEDs have a max forward current of ~30mA (meaning that if you design your circuit to allow more than 30mA continuously through the LED, it...
I lost the right side of my display last December as we were driving back to New Mexico for Christmas. I've heard of several other instances of...
I used to worry about that. I even went to the trouble of removing the Garmin logo from the base so as not to give a clue to the clueless....
