Separate names with a comma.
Attachments are working again! Check out this thread for more details and to report any other bugs.
At this point I know it's an issue with either a ground, the pcm, or maybe the o2 sensor but i already tried replacing it (not with a denso...
I have even tried a new o2 sensor and that didnt show any change. I set the multimeter to every resistance setting and could not get a reading and...
I also tested continuity on D24 pins 1 , 3, and 4 to the ECM and they have good continuity. I'm at a complete loss now as to what the issue could...
I am having a similar issue. I changed my oil and the pcv which meant taking off the intake manifold and after this I started getting all sorts of...
Yep and I did have an exhaust leak so I ditched the shifty gasket fel pro gives you and went back to the oem gasket and that fixed it.
As it turns out the actual connector on the injector was bad. I broke one of the wires connection when I removed it but visually it looked fine. I...
A cylinder 1 misfire absolutely usually means a blown headgasket on a 2010-2015 prius. Seen it many many times. That being said the misfire or...
I just got this 2013 Prius, it was a fleet vehicle and has 390k on the body and an unknown mileage on this engine because it was replaced. Just my...
Thanks for that i didnt know used cars got a 15 day period for return if major repairs are needed. I hope itll hold up because obviously its a...
I'm not sure how old the battery is, theres a sticker on it but i cant make out what month and year. I tested the battery after the car had been...
I got no where with the inverter recall other than they did the software update. Toyota does not believe there is a problem with the inverter...
I called the dealer back, they say the work to the car is now complete. I asked them why if the code is specifically for the inverter are they...
I have looked at the repair manual now and will do some more reading on it but from what I can see P0A08-264 has nothing to do with the hybrid...
I am looking at the manual but can't find the page or pages for the specfic DTC P0A08-264
