Separate names with a comma.
I removed the steering wheel and centers it on the shaft and now the steering feels normal. I believe I must have rotated the shaft when I...
Is there a way to check if the steering shaft have been move? or should I just try to remove the steering wheel and then move the steering shaft...
Thanks for the help. After changing the clock spring and steering angle sensor I was able to clear the code u0126 and I can see yaw values and I...
Thank you for the link and the clock spring 84306-48030 fitted perfectly in my prius gen 2
Hi I need a new clock sprint and does the 84306-48030 fits the Prius gen 2? There are a lot of cheap clock sprint on ebay with OEM part nr...
Thanks found the value now and it says 1143 deg so it’s right out wrong. Could I try recalibrate my sensor module? Or is it broken
I bought myself the mini vci with techstreamer and pluged it in and I can not see any steering angel sensor values on the emps view. I don’t even...
Replaced the steering angel sensor module with one i found used on the internet. Installed it and got the exact same warning on the dashbord ⚠️5...
I belive i found the right cabel it’s the gray and it have +11 v on pin 1-2 and -11v on pin 2-3. So i will try order a used on on and see if works
Hi I found good step by step videos on youtube about how to remove the steering wheel and I measured the voltage on the white cable which I assume...
I went to the mechanic and got my Prius diagnosed the error code is u0126 it's lost communication with the steering wheel sensor. He thought I...
I charge the battery it was on 11v but I still have error on the dashboard. got sone error code from diagostic are these code relevant?
I get the Yellow regenerative brake system warning light On dashbord 5 second after motor start i get it if I stand still or driving. The breaking...
