Separate names with a comma.
Attachments are working again! Check out this thread for more details and to report any other bugs.
Chapman thanks for the response. I was finally able to get through it after multiple attempts. Man I sure hope I never have to deal with this...
I sure hope it isn’t a bad part! No warranty on parts privately installed right?
It is dealer sourced master cylinder and validated to my VIN.
Just changed the Brake accumulator on my 2013 Prius, it was hissing air and causing an accumulator leak detected dtc . I’m going through the brake...
2013 Prius, I have code b1498 and believe my compressor is bad, all ac fuses check good. Fluid is seen in the sight glass but no bubbles are...
Can I still access that freeze frame data when the code is cleared? When I go to trouble codes for hybrid control, the freeze frame icon is...
Well guys it looks like changing the #2 spark plug took care of the misfire.
Picture I was supposed to upload in previous post
So when I pulled up the freeze dram it had a P0aa6-526. I posted a pic for reference. I ran the vehicle is maintenance mode for about 20...
I will pull up the freeze date for the p0aa6 code and post some photos once I get home. Is the freeze data where the sub code will be displayed...
Was anyone able to look at my techstream data photos and see what could possibly be causing the p0aa6?
I just did head gasket and am hoping the short drive to town with a failing, mines spins a few hundred rpm above the targeted range, water pump...
Yes I cleaned the egr system and intake when I did the head gasket, so 2 weeks ago 198000 miles
So I swapped ignition coils, and cylinder 2 is still miss firing, I will change the spark plug tomorrow and swap injectors after…. Could it be the...
