Separate names with a comma.
Attachments are working again! Check out this thread for more details and to report any other bugs.
It's been a while since I replaced the last one, the good ones last several years running on dusty roads while delivering mail with the window...
That little black hose is just for overflow, that all the inverter coolant is being pushed out of it in an hour drive is very odd...., how much...
I would use some electrical cleaner on the the power button itself / plus the connection on the backside of it, to see if that is the problem.
Found an amusing/ and a bit crude article from jason at jalopnik . com about the new 2016 Prius. His take on the center console (which is a big...
Quoting from another web site.. ------------Mounted to the back of the spiral cable which has to be physically detached, reattached, and plugged...
[ ICE coolant system builds pressure, overflow tank overflows. Replaced water pump. No change. Issue continues. Bought that HG test kit, where...
Its been over two years since I put 2010 cells in my 2004 HV pack, still working fine. I felt for myself, simply switching was safest. Replaced...
The top fill plug appears to be underneath the inverter, so its much more practical to use the check plug to add fluid--Hobbit write up a good...
I still wonder about this issue, that you may still have a air pocket causing less fluid flow . Do you know someone with a similiar model Prius...
Does the reservoir for the inverter coolant have turbulence when the car is in READY mode? This would be my first step, making sure the coolant...
Recommended engine oil is 5/30 , its printed on the oil fill cap. If you like 0/20 and it works for you, fine, but its not factory recommended...
Nedim--if this rattle is also inside the car, just push around the area where you hear the noise, having a friend drive could also help here.
Reverse beep disabled! (Australia/Europe) | PriusChat with pic's.... should help.
Holding down the power button 10 seconds normally works, but I've had a defective combination meter ignore that, I disconnected the negative...
----both tires same size---- so did you replace just one set or all 4 ? Just trying to find some size difference that could be causing this..
