PriusDadNoob's Recent Activity

PriusDadNoob replied to the thread VSC Brake lights on - C1345 error code - will not clear - my fault?.

Problem solved! Thanks for all the help. @mr_guy_mann you win the prize. It was a 12v battery problem. I connected my (old style...

PriusDadNoob liked Tombukt2's post in the thread VSC Brake lights on - C1345 error code - will not clear - my fault?.

No you can have a battery tender or a battery charger set down on the two amp charge mode or something like that not on the 30 amp jump...

PriusDadNoob replied to the thread VSC Brake lights on - C1345 error code - will not clear - my fault?.

Update: I tried to disconnect the 12v and HV battery overnight. That did not help. I have made a video of the issue. I have read the...

PriusDadNoob liked mr_guy_mann's post in the thread VSC Brake lights on - C1345 error code - will not clear - my fault?.

One of the main points in the "pre"-procedure is that the 12V battery is healthy and fully charged. This can cause the initialization...

PriusDadNoob replied to the thread VSC Brake lights on - C1345 error code - will not clear - my fault?.

Will do. I’ll get a copy of the manual and make sure I’ve done things correctly. I did drive it 15 miles to work today. Strange to...

PriusDadNoob liked ChapmanF's post in the thread VSC Brake lights on - C1345 error code - will not clear - my fault?.

If you really had not done any brake work, and the trouble only started when you ran this learning procedure unnecessarily, then I...

PriusDadNoob replied to the thread VSC Brake lights on - C1345 error code - will not clear - my fault?.

Great advice as usual @ChapmanF I do t have the manual but will follow your link and see about getting one. I’ll also inspect brakes...

PriusDadNoob liked ChapmanF's post in the thread VSC Brake lights on - C1345 error code - will not clear - my fault?.

I've done the linear offset learning on a gen 3 but never personally on a gen 2. It sounds similar from your description, but I probably...

PriusDadNoob replied to the thread VSC Brake lights on - C1345 error code - will not clear - my fault?.

@Tombukt2 Thank you for your ideas. I will try to disconnect the 12v and HV battery overnight and see if that helps. I did the 12v...

PriusDadNoob liked Tombukt2's post in the thread VSC Brake lights on - C1345 error code - will not clear - my fault?.

Generally you didn't do anything wrong you just messed with something that didn't need to be messed with but that doesn't matter now so...

PriusDadNoob replied to the thread VSC Brake lights on - C1345 error code - will not clear - my fault?.

@ChapmanF I checked and you are absolutely correct on the steering bit. I did the torque sensor zero point, not the angle sensor! It did...

PriusDadNoob liked ChapmanF's post in the thread VSC Brake lights on - C1345 error code - will not clear - my fault?.

Do you hear it trying to learn the linear valve offset? It takes a minute or so, and makes a series of clicks and increasingly loud...

PriusDadNoob posted a new thread.

VSC Brake lights on - C1345 error code - will not clear - my fault?

2008 Prius. My steering was "loose" at speed so I connected my laptop to the OBD2 port, fired up Techstream and then... clicked the...

Forum: Gen 2 Prius Main Forum

PriusDadNoob replied to the thread C1345 code not going away.

Did you ever fix this? I have this problem.

PriusDadNoob liked Omer Afzal's post in the thread C1345 code not going away.

Just to add in it i am using the attached method to calibrate the C1345. probably i am missing the following steps. Can someone guide...