Separate names with a comma.
Attachments are working again! Check out this thread for more details and to report any other bugs.
Paul, we recently did some work on our 2002 Prius, including changing the brakes, and have encountered the same problem (ABS light + brake light)....
Update: Once of the cells had a nut missing. I discovered this while doing a visual inspection. I attached the nut over the bus bar and cell...
I wasn't sure. I'm stumped then. This is quite the puzzler. Anybody else have any ideas on what to check/ look for?
When I turn the ignition to start the car, there is a single clicking sound coming from near the inside fuse box ( far left side of the...
All cells measure 7.6 or 7.7 volts. So cells seem to be good. I'm not sure where to go from here.... The car was sitting for 7 months undriven....
So I took off the cover and inspected the sensors. It has a brand new harness with new sensors and bus bars, so as anticipated none of the sensors...
It doesn't attempt to start. When I turn the ignition to start, I hear quick click and nothing happens.
[ATTACH] @ bwilson4web and @ yotatoter The DTC's are the same now (post polarity reversal and hv replacement) as they were before any of this...
@ bwilson4web Are you sure it's a 125A fusible link connector? The 100A fusible link in the engine compartment was fried... but I replaced it...
@yotatoter and bwilson4web Thank you for taking the time to respond. Can't wait to apply your suggestions. I'll keep you posted with what I find...
Any and all feedback + suggestions are appreciated. In short, I went traveling for 7 months. I unplugged the 12v and hv battery on our 2002 Prius...
Posted in wrong forum. Removed to re-post.
@nh 7o Thanks! I'll call customer service to see if our vehicle qualifies.
