Separate names with a comma.
Attachments are working again! Check out this thread for more details and to report any other bugs.
lol the nav in car is probably my least used feature :)
I did go through all the options to test. Nothing of note there. But I had my head under there when I turned the car on; found the sound was...
I don’t think it’s the brake booster pump as that has never made such a sound like the one I’m hearing. And it never does it again, just upon...
I recently had my blower motor out for maintenance (which went worse than expected, but that's another story), but it's now back in and working...
A new 12v battery wouldn't be too expensive to replace anyhow. It has been known to cause random issues when they start going low, but is harder...
Forgot to read the next 3 pages :-P Also, Australian 2nd gen Prius has rear disk brakes. "Handbrake" is a drum. So it has both :-P ...
Did you get to check that pin? A bit of silicone grease may help with stuck calipers if the old grease is gone. C6903 using...
There are a few people who have added lithium onto the NiMH battery, but still needed the NiMH in place for it to work. Also costs a ton of money....
Yes, the hidden pin uses a hex/Allen key. If working correctly the caliper could slide right out. They might start rotating the pin via the...
It was broken when I got the car. I wouldn't rule out bad dismantling jobs, as the rear door also had a few broken plastic pins and a missing nut...
I only drilled a small hole first in the back to spray more penetrating lubricant inside. With the front side grinded down to two flat sides, I...
I did it! Started drilling a hole through the middle, gave up, so I took the angle grinder to it, drilled a hole through the back, used a shifting...
[IMG] It is this one. The threaded part of the old one is gone, only the thick pin remains. Once that is removed, I can simply screw in the new...
So, I ended up with the correct part, but now have an issue with removing the old pin. The threaded part is sheared off, though it's not a problem...
