Separate names with a comma.
Attachments are working again! Check out this thread for more details and to report any other bugs.
Bad fuel injectors will cause the noise and vibration. You would swear blind the transaxle was stuffed but its the gear train chattering when the...
Were there any warning lights on? or any loud noises from the transaxle area? what colour was the oil when you drained the transaxle? While the...
Genuine plugs in Australia retail at about $24.00 per plug.
Remove the bulb holder from the wiring loom. Remove the bulb from the holder. When you look down into the holder you can see the 4 contacts.These...
I have rebuilt several transaxles for the taxis. If the noise is reported early enough i can put a set of bearings thru it. If its not reported...
Sometimes the radiator fan is still running but not at its normal speed and as britprius said the a/c wont cool at idle.
The joint that goes into the transaxle is a very basic tri joint that doesnt usually give problems. I have had gen 2 prius do over 500,000km and...
Sounds like a dirty battery cooling fan. How many miles on your prius ? has the fan ever been cleaned ?
Be careful when you remove the white resonator box as your ice can ingest water and lock up. Have had it happen here to a gen 2 taxi with 7000km...
Hi smogslide Carnt help you with any shops in Melbourne but if you find one let me know as i have a customer down there that is looking too. He...
The cars (prius) have done there 4 years and i think the owners are scared of the gen3 . I havent seen an owner go from a Ford/Holden to a Prius...
Replace the instrument display and your prius will be fixed. Its very common here in Australia with older high KM cars.
The drivers here only know one speed Flat out . The transaxles fail due to the aluminium wearing away in the bearing housing below the silent...
I do all 16 prius taxis ( and 2 camry hybrids ) myself. They generally look after themselves. If there are any problems most of the drivers come...
Gen 3 is easier to do than Gen 2. The Gen 3 hub falls apart after the 4 retaining bolts are removed. Remember to mark the backing plate position...
