Separate names with a comma.
Attachments are working again! Check out this thread for more details and to report any other bugs.
I finally stripped the mod wiring all the way back to the connection to the ICE connector, removed it all together (since that is a normally...
New 12v batt and readings are 12.5vdc... Car has been in service continuously since Plug in Supply battery pack was removed. I removed all the...
I successfully installed the PluginSupply about 6 years ago and got about 2.5 trouble free years out of it. I then had problem with cell balancing...
Where is the side curtain air bag module located in the Gen 2
I have looked at the grid charger and think this might be a good investment for my situation (and to answer the question "why so many Prius's...
I have a couple wrecked Gen2 that I plan to repair. One was running about 8 months ago when I moved it around and let it charge the main battery...
Get's a Tinkerer thinking! Humm! a lot of Gen1 out there for cheap. Or I have two Gen2 wrecks here that I was going to part out. But I would want...
Not going to work on my 2004 problem area at the front edge, because there just isn't enough fabric to go in far enough. On the 2006 that I took...
I'm using an Acer note book with the Windows 7 Starter, which is 32 bit. Others haven't had any problem with Windows 7 as long as it was 32 bit. I...
I became interested in the Mini-VCI while discussing some problems I was having with the ELM327 OBD2 adapter in the Torque Pro thread. After...
Thanks for the encouragement. I also think this "Hack into TechStream" will be very useful to maintain my own two running Prius and plus support...
Originally, a year ago I paired both the ELM 327 and ELM 327 mini and they worked fine for the few system functions I was using but I never did...
This info is helpful to some extent, in that, I now know I'm not alone. However, my Torque Pro (paid for) and Android, GingerBread version are...
