Separate names with a comma.
Attachments are working again! Check out this thread for more details and to report any other bugs.
Ok. I have XSE premium and I always hear weird cracking Wind noise from the door window over 120 km/h speeds. I went to dealer too. They tried to...
Anyone else notice lots of wind noise from driver side window area at highway speeds on Gen 5 Prius? Similar to this issue [MEDIA] Is it a design...
Would you be able to test in yours if you set the memory to max seat height if it would return to that height or if it stops below reaching the...
I found this in the manual: The seat position may not be recalled in some situations when the seat position is recorded in a certain range. For...
I did but it's the same. Also weird that the video says the saved seats would clear after re-calibration but mine do not clear.
I use the maximum vertical seat height. Memory seat works for horizontal position and thigh rest position and kind of works for the vertical...
I would suggest looking at aliexpress for a 20 pin power harness that would match the wiring diagram they gave. Thats how I found mine.
Otherwise from the picture it looks like its using same firmware as mine. I had the same home screen as in your picture and my device is also MTK8667
Your's looks different. My power port has 16 pins on the new head unit but yours seems to be 20 pin power connector.
I also have the 8667Q based android head unit. Where are your pictures I don't see them.
I had the same issue even my seller sent incorrect wiring initially. It didnt matter much cause I also ordered the wire set I linked above. My...
Also this post has an extensive guide that may help you Toyota Prius 2011 B9016 IPA replace by Android Sandocom haed unit project | PriusChat I...
Seller initially sent me wrong one as well though he sent me correct one later I also ended up ordering and using...