Separate names with a comma.
Attachments are working again! Check out this thread for more details and to report any other bugs.
I have my one year service coming up in five weeks. If nothing is resolved by then, I will let them look at it. My only reason for posting here...
Thought it was fixed today, but it wasn't. I bought gas and started up. No "check hybrid" message for the first time in several days. However, it...
Kwhubby, yes I connected to pin 13. I double checked with an ohm meter that I had not shorted to any other pins. The fogs are working just fine....
Nope, I already read that, and I searched the forum for other solutions. I never touched the HV battery. The car starts and runs normally.
I added fog lights, and I removed the fuse box and body computer to do so. I disconnected the 12V battery for most of the work, but later I did...
I got the fog lights installed in the bumper today. It wasn't as easy as I expected because I didn't jack the car up and the working area is...
"Mr. Incredible", the rule for not mixing tire types is pretty basic. The Prius C owner' manual makes a strong warning that this could upset the...
So, C3#27 doesn't activate the fog relay?? I think this is the same ECU as in the Prius C4, so what are we missing? The ECU must need another...
DO NOT mix snow and regular tires. It is not a matter of traction straight ahead, but traction in the curves. The same rule applies to radial...
If I understand you correctly, the connections shown on the schematic are not all there for the I,II and III models. Namely, pin C3#7 is not...
Just got the fog kit today. I looked at the diagrams, and what I want to do is to connect two wires from the back of the interior fuse panel. One...
For snow, the narrower the tire, the better. The bigger the diameter, the better. I use the 15" stock rims with stock sized Nokian studded....
I'm running Nokian "haka.... (too hard to spell), and they are studded. What's even better, they are the same size as the stock tires. I don't...
OK, OK... Enough advice about not "screwing" with anything. The solution on the other Toyotas I saw was both elegant and relatively easy. It...
