Separate names with a comma.
Attachments are working again! Check out this thread for more details and to report any other bugs.
All PDFs below can be found in this One Drive Folder The HV ECU is sometimes referred to as the HV Control ECU and could probably be referred to...
Are you doing the entire Linear Valve Offset Procedure correctly? You have to clear the memory of the Linear Valves (reset memory function) before...
Glad I could be of help @sworzeh! (y)
I have made another short Graphic Video to describe the EV States: [MEDIA] 5x Speed Version: [MEDIA] This video is probably the most condensed...
A very small update to this thread: [MEDIA] I am beginning to work on the final write-up for this low mpg mechanism again. I made the short...
I figured out what the Signal Soother does... I just didn't watch the Signal Soother video close enough. He says exactly what it does between 1:25...
You need to reread @sworzeh's post... what you're stating is not correct. Yes you're correct that P0A80 was the issue... and that issue was...
This fact does not matter at all. Those cables that the Signal Soother is placed on measure Internal Resistance and Voltage. They serve the same...
No... because it doesn't directly compare how long it took for the error to overcome the Signal Soother... Which is why I specifically asked you...
You'll be fine driving with the Signal Soother... as long as something doesn't go wrong with the pack and the Signal Soother doesn't prevent the...
It doesn't prove this at all actually. Yes you're correct... I didn't test the Signal Soother. I'm going to elaborate more on why exactly I...
Well it alters Voltage readings in some way shape or form... I assume it has zero effect on actual module balancing because it "sooth signals"....
Nope. The one I own is fine. Internal resistance updates via a sliding average and only when the Hybrid Battery Temp is between 70-116°F. The...
I read the thread... I would still like to see the results realtime doing a test similar to the mutimeter voltage and battery ecu voltage...
I would like to see video evidence of the Signal Soother doing it's thing realtime as I asked in my original comment on the failure thread....
