Separate names with a comma.
Attachments are working again! Check out this thread for more details and to report any other bugs.
That is exactly what I had. I replaced the cable and it fixed it
How would you get electrolyte on a HV cable in a 2nd gen Prius ?
When you run your check try this first; leave the cable hooked at the inverter but disconnected from the HV battery. Check the resistance between...
When I replaced mine I did not have to do either of those steps. I did not have access to a manual when I did mine. You also need to keep in mind...
I'll see if I can give you the reader digest version. I've done this once. The first thing is you have to pull the safety switch out of the HV...
I have found by looking through a lot of the postings here that they never seem to have an end. Many times there is never a resolution to the...
Thanks, I will check it out
I found the problem. It is the top battery cable from the HV battery into the inverter. There is a metal ring around the inside of the plug that...
Thanks for the information. I thought that was probably what was going on but I really did not expect to see it act that way because of the HV...
I have been trying to track down an issue with my daughters 2005 Prius. Her mother gave it to her and she started to have some issues with it...
The code is P0AA6 with a sub-code of 526. There is also a C1310 code from the in the ABS ECU with no sub-codes and the A/C ECU is throwing B1421...
Thanks for the information. The reason I was wondering about the gas gauge was because the car was almost empty when the problem happened...
That may be true but that was not a helpful comment. The codes I am getting do not seem to point to a HV leak though. The master caution light...
One other bit of information is the car will not set the code if the parking brake is set. The instant the parking brake is released (not the...
