Separate names with a comma.
We did order the actuator unit already. I don't know if a different scanner could help. I really think it's just a bad actuator ECU unfortunately....
The old one was running continuously but nothing else has changed since then except for the pump. The scanner does have a procedhre for it but it...
I also have tried their fix and it didn't work for me.
There is no lights on the dash. I'm using an old Snap On scanner. The brakes are 100% fully bled and everything seems to have been done perfectly....
There is no other codes. We did all the required steps, at least as far as I am aware. What would you say are the required steps?
I'm using OBD II to run the pump manually.
Yes, but I can manually turn on those relays and run the pump that way.
Whenever it's low on pressure it will beep and show codes. If you turn on motor relay 2 and run the pump it will function just fine meaning it can...
Basically, if you function as the ABS ECU you can drive the car just fine. However, the car refuses to run the pump.
I'm sorry, I was using the assembly and pump interchangeably. We replaced the whole assembly and it won't build up pressure. Using a scanner we...
It was a used one unfortunately. However, there are no codes except for the accumulator pressure fault whenever the pump randomly decides not to run.
Hello! We finally replaced the ABS pump after a few weeks of it running constantly. We replaced the pump and bled the brakes and we are absolutely...
