Carbon fiber front and back Toyota emblem mod

Discussion in 'Gen 3 Prius Accessories and Modifications' started by ucsmfu, Jul 13, 2012.

Page 1 of 2
  1. ucsmfu

    ucsmfu Senior Member

    Joined:
    Sep 21, 2011
    1,498
    420
    0
    Location:
    canada
    Vehicle:
    2010 Prius
    Model:
    V
    Was able to get an exact fit carbon fiber vinyl to replace the heat blue insert. Gonna take the opportunity to plasti dip the emblem too :p

    the front and back emblems have 3 clips holding it, once you remove it it's pretty easy :)

    [​IMG]
     
    #1 ucsmfu, Jul 13, 2012
  2. xliderider

    xliderider Senior Member

    Joined:
    Apr 19, 2012
    8,140
    3,274
    0
    Location:
    Honolulu, HI
    Vehicle:
    2011 Prius
    Model:
    Three
    "Exact fit" carbon fiber vinyl can be found on eBay, but the vinyl is cut into 6 pieces that are meant to be applied to the emblem without taking them off.

    If you are taking the emblems off, why buy an "exact fit" vinyl when you could cut a sheet to fit? :confused:
     
    #2 xliderider, Jul 13, 2012
  3. Russ D

    Russ D Junior Member

    Joined:
    May 6, 2012
    22
    1
    0
    Location:
    So Cal
    Vehicle:
    2010 Prius
    Model:
    II
    There is an easy answer to that... the "exact fit" vinyl pieces are cheaper than most of the rolls you can buy from China, you don't have to wait for the shipment from China, and it's already cut out so you don't have to spend your own time cutting everything out. Some people want to do it themselves, other people like the convenience. Why go out to a restaurant if you can go to the grocery store and make a meal for yourself?
     
    #3 Russ D, Jul 13, 2012
  4. TruSound

    TruSound Member

    Joined:
    Feb 1, 2012
    246
    32
    1
    Location:
    The 818
    Vehicle:
    2012 Prius v wagon
    Model:
    Three
    Looks great, can you please provide the link to the seller...thanks.
     
    #4 TruSound, Jul 14, 2012
  5. ucsmfu

    ucsmfu Senior Member

    Joined:
    Sep 21, 2011
    1,498
    420
    0
    Location:
    canada
    Vehicle:
    2010 Prius
    Model:
    V
    #5 ucsmfu, Jul 14, 2012
  6. TruSound

    TruSound Member

    Joined:
    Feb 1, 2012
    246
    32
    1
    Location:
    The 818
    Vehicle:
    2012 Prius v wagon
    Model:
    Three
    Look forward to seeing it...thanks. The EBay seller lives 15 minutes from me
     
    #6 TruSound, Jul 14, 2012
  7. ucsmfu

    ucsmfu Senior Member

    Joined:
    Sep 21, 2011
    1,498
    420
    0
    Location:
    canada
    Vehicle:
    2010 Prius
    Model:
    V
    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     
    #7 ucsmfu, Jul 15, 2012
    TwoUnderPar and Russ D like this.
  8. Russ D

    Russ D Junior Member

    Joined:
    May 6, 2012
    22
    1
    0
    Location:
    So Cal
    Vehicle:
    2010 Prius
    Model:
    II
    Looks awesome! :cool:
     
    #8 Russ D, Jul 15, 2012
  9. MMMpg

    MMMpg Junior Member

    Joined:
    Dec 12, 2011
    4
    0
    0
    Location:
    CA
    Vehicle:
    2011 Prius
    Model:
    III
    any tips on removing the emblems?
     
    #9 MMMpg, Jul 17, 2012
  10. Russ D

    Russ D Junior Member

    Joined:
    May 6, 2012
    22
    1
    0
    Location:
    So Cal
    Vehicle:
    2010 Prius
    Model:
    II
    The front is easy... pop the hood and there is an access hole. Put your hand in there and undo 2 of the 3 clips holding it in. Pops right out.

    Back is easy also, just more complicated than the front. Put a card (such as a credit card) under the chrome Toyota emblem on the left or right side and push toward the center of the car. It will release the side clip and enable to emblem to be free from the rear hatch.
     
    #10 Russ D, Jul 17, 2012
  11. ockevin

    ockevin Active Member

    Joined:
    Nov 24, 2011
    493
    148
    0
    Location:
    Orange County
    Vehicle:
    2011 Prius
    Model:
    Four
    I got the same one, arrived fast and I installed both in 10 minutes total.
     
    #11 ockevin, Jul 17, 2012
  12. ockevin

    ockevin Active Member

    Joined:
    Nov 24, 2011
    493
    148
    0
    Location:
    Orange County
    Vehicle:
    2011 Prius
    Model:
    Four
    [​IMG]
     
    #12 ockevin, Jul 17, 2012
    alanderego likes this.
  13. billydon

    billydon TSS Limited Edition

    Joined:
    Aug 1, 2012
    7
    1
    6
    Location:
    Gun Barrel City Tx
    Vehicle:
    2012 Prius
    Model:
    Three
    Kevin, did you plasti dip the chrome logo in gunmetal? And put the carbon fiber insert behind it?
    The match to the winter grey looks perfect, was debating on buying the plasti dip in smoke or gunmetal, and the clear to give it a little gloss. Yours looks like a perefect match
     
    #13 billydon, Nov 6, 2012
  14. born_again

    born_again Member

    Joined:
    Oct 8, 2012
    103
    47
    0
    Location:
    Rancho Palos Verdes, CA
    Vehicle:
    2012 Prius c
    Model:
    Two
    Oh boy.
     
    #14 born_again, Nov 7, 2012
  15. daevumshlebee

    daevumshlebee New Member

    Joined:
    Nov 1, 2012
    18
    1
    0
    Vehicle:
    2012 Prius
    Model:
    N/A
    what did you dip the emblem in to? and could you describe the process?

    I love the way this looks. I have the nautical blue metallic, and the bright blue of the emblem clashes....if i don't do the plastic dip, the carbon fiber insert alone will improve this look tremendously

     
    #15 daevumshlebee, Nov 7, 2012
  16. ucsmfu

    ucsmfu Senior Member

    Joined:
    Sep 21, 2011
    1,498
    420
    0
    Location:
    canada
    Vehicle:
    2010 Prius
    Model:
    V
    just plasti dip, remove the emblem, stick the carbon fiber insert on the heat blue plastic piece, you can find the precut carbon fiber inserts on Ebay. for the chrome Toyota emblem, you spray that with plasti dip, 3-4 layers, wait about 20 min in between each coat. Than at the end you can choose to apply matte or glossifier coatings depending on your liking.

    cheers :)
     
    #16 ucsmfu, Nov 7, 2012
  17. Fore

    Fore Don't look back!

    Joined:
    Feb 1, 2011
    494
    107
    0
    Vehicle:
    2010 Prius
    Model:
    II
    [​IMG][/quote]

    Hey, where did you get the right and left lower guards below the fog lights?
     
    #17 Fore, Nov 7, 2012
  18. ucsmfu

    ucsmfu Senior Member

    Joined:
    Sep 21, 2011
    1,498
    420
    0
    Location:
    canada
    Vehicle:
    2010 Prius
    Model:
    V
    Hey, where did you get the right and left lower guards below the fog lights?[/quote]
    that's part of the Prius Plus body kit
     
    #18 ucsmfu, Nov 7, 2012
  19. ockevin

    ockevin Active Member

    Joined:
    Nov 24, 2011
    493
    148
    0
    Location:
    Orange County
    Vehicle:
    2011 Prius
    Model:
    Four
    search on youtube for plasti dip and you will see the whole process.
     
    #19 ockevin, Nov 8, 2012
  20. itengineer

    itengineer Member

    Joined:
    Oct 23, 2011
    86
    25
    2
    Location:
    Minneapolis
    Vehicle:
    2011 Prius
    Model:
    Two
    Just did this carbon fiber mod. Looks good. Thanks for the eBay link.
    I passed on the plasti-dip for now.
     
    #20 itengineer, Nov 15, 2012
(You must log in or sign up to post here.)
Page 1 of 2