1. Attachments are working again! Check out this thread for more details and to report any other bugs.

What did you do to your Prius v wagon today?

Discussion in 'Prius v Accessories and Modifications' started by Mike500, Mar 31, 2015.

Page 1 of 5
  1. Mike500

    Mike500 Senior Member

    Joined:
    Mar 1, 2012
    2,593
    764
    0
    Vehicle:
    2012 Prius v wagon
    Model:
    Two
    Seeing all of those post to the Generation III thread, I decided that it's about time that v owners got their own...

    I am going to start with my latest modification. I decided that the silver start, park, hazard and shifter surround panel would look better in black.

    The panel is very easy to remove. Just pry with a plastic wedge on the top to release the clips. The bottom comes off with your fingers pulling on it.

    The hazard switch pack, the start button and park switch wire connector blocks unclip from the back.

    The switched remove by releasing their own tabs.

    I sanded off the very thin silver paint coating with 400 wet or dry paper.

    After masking, painting and letting the paint to dry, reassembling took just five minutes.
     

    Attached Files:

    #1 Mike500, Mar 31, 2015
    Montgomery, SnoozinJTD, Saucydonnie and 1 other person like this.
  2. Starbrand

    Starbrand Senior Member

    Joined:
    Dec 17, 2014
    493
    1,502
    0
    Location:
    Westmont, IL
    Vehicle:
    2015 Prius
    Model:
    Two
    I'm excited to see this thread grow (y)
     
    #2 Starbrand, Apr 3, 2015
  3. asukadc

    asukadc New Member

    Joined:
    Apr 10, 2015
    19
    8
    0
    Location:
    California
    Vehicle:
    2015 Prius v wagon
    Model:
    Three
    i just joined today, gonna make a bunch of posts with links... can't do it until i have 24 hours into the PC forum
     
    #3 asukadc, Apr 10, 2015
  4. Bill the Engineer

    Bill the Engineer Senior Member

    Joined:
    Jun 6, 2013
    1,048
    2,278
    467
    Location:
    At the beach in Delaware...
    Vehicle:
    2010 Prius
    Model:
    IV
    Gonna watch this thread too. Maybe it will give me some more ideas... :whistle:

    Bill the Engineer
     
    #4 Bill the Engineer, Apr 10, 2015
  5. Mike500

    Mike500 Senior Member

    Joined:
    Mar 1, 2012
    2,593
    764
    0
    Vehicle:
    2012 Prius v wagon
    Model:
    Two
    I replaced the blue power start button with a black one from a 2011 Prius. It's a perfect fit and took five minutes.
     

    Attached Files:

    #5 Mike500, Apr 11, 2015
    SnoozinJTD and Starbrand like this.
  6. asukadc

    asukadc New Member

    Joined:
    Apr 10, 2015
    19
    8
    0
    Location:
    California
    Vehicle:
    2015 Prius v wagon
    Model:
    Three
    not exactly today but did this within the past 3 weeks,

    Clear bra front end, Tint, roof wrap.

    before roof wrap:
    [​IMG]
    after wrap:
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    weather tech floor mats:
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    clear bra
    [​IMG]
    [​IMG]
    [​IMG]

    LED interior conversion:
    [​IMG]
    [​IMG]
    [​IMG]
     
    #6 asukadc, Apr 13, 2015
    Last edited by a moderator: Apr 15, 2015
    icyrius, Saucydonnie, RichardY and 3 others like this.
  7. Starbrand

    Starbrand Senior Member

    Joined:
    Dec 17, 2014
    493
    1,502
    0
    Location:
    Westmont, IL
    Vehicle:
    2015 Prius
    Model:
    Two
    Nice Recaro seat :D
     
    #7 Starbrand, Apr 13, 2015
    asukadc likes this.
  8. asukadc

    asukadc New Member

    Joined:
    Apr 10, 2015
    19
    8
    0
    Location:
    California
    Vehicle:
    2015 Prius v wagon
    Model:
    Three
    Gotta keep the mod game up, my other car is a 2010 451 awhp Sti hatch
     
    #8 asukadc, Apr 13, 2015
    Starbrand likes this.
  9. Mike500

    Mike500 Senior Member

    Joined:
    Mar 1, 2012
    2,593
    764
    0
    Vehicle:
    2012 Prius v wagon
    Model:
    Two
    Here's another photo of my "micro" short shift Duracon TRD shift knob.
     

    Attached Files:

    #9 Mike500, Apr 15, 2015
    TheTewks and Starbrand like this.
  10. asukadc

    asukadc New Member

    Joined:
    Apr 10, 2015
    19
    8
    0
    Location:
    California
    Vehicle:
    2015 Prius v wagon
    Model:
    Three
    JDM Covers:
    Inverter Cover, Reservoir Tank Cover, Connector Cover
    [​IMG]

    [​IMG]

    [​IMG]

    Hood Shocks

    [​IMG]
     
    #10 asukadc, Apr 15, 2015
  11. Mike500

    Mike500 Senior Member

    Joined:
    Mar 1, 2012
    2,593
    764
    0
    Vehicle:
    2012 Prius v wagon
    Model:
    Two
    I added a special thick spiral wrap for the inverter control cables to protect them from being chewed by rodents.
     

    Attached Files:

    #11 Mike500, Apr 16, 2015
    asukadc likes this.
  12. asukadc

    asukadc New Member

    Joined:
    Apr 10, 2015
    19
    8
    0
    Location:
    California
    Vehicle:
    2015 Prius v wagon
    Model:
    Three
    ^^^ mike i see u got the cover for t he harness as well. i can't believe toyota would leave the usdm prius out with that
     
    #12 asukadc, Apr 17, 2015
  13. Mike500

    Mike500 Senior Member

    Joined:
    Mar 1, 2012
    2,593
    764
    0
    Vehicle:
    2012 Prius v wagon
    Model:
    Two
    Yeah, I ordered mine from Japan.
     
    #13 Mike500, Apr 17, 2015
  14. Eric "v"

    Eric "v" Member

    Joined:
    Nov 17, 2014
    229
    44
    0
    Location:
    'Vegas, NV, Baby
    Vehicle:
    2013 Prius v wagon
    Model:
    Two
    I do have the small cover for covering the narrow electrical box right of the inverter. Got it on eBay.
    Why do I need the other covers?

    Modding cars can be an expensive hobby. Hate to say it but I've got over $4,000. of mods on my 2013 v (purchased Feb. 2014).

    I've got almost every body stiffener Juiced Hybrid sells, lowering springs and a Cusco front sway bar. And then there's the ENKIE 17" lightweight wheels, INJEN cold air intake, several lighting mods, etc.

    Worth it? Well for the handling, yes. For more power from the CAI? Maybe. A rear sway bar and leather wrap for the steering wheel and I'll be done with the mods - I think. :0)
     
    #14 Eric "v", Apr 23, 2015
    Last edited: Apr 23, 2015
  15. asukadc

    asukadc New Member

    Joined:
    Apr 10, 2015
    19
    8
    0
    Location:
    California
    Vehicle:
    2015 Prius v wagon
    Model:
    Three
    totally understand, my 2010 sti got about 25k into when the car after tax cost 43k fully loaded it, keep the modding game up!
    just the kw v3 on my sti cost 2600 lol
     
    #15 asukadc, Apr 24, 2015
  16. sean v4

    sean v4 Junior Member

    Joined:
    Mar 6, 2015
    54
    12
    0
    Location:
    Corona, CA
    Vehicle:
    2015 Prius v wagon
    Model:
    Four
    Hi
    This is one of my favorite thread on this forum so I thought I should contribute and share a picture. :). Hope you guys/gals like it.

    I put one Led strip in each glove because the couldn't find anything in the dark and since I put my black flashlight in there I could not find the darn thing. Kinda funny...

    image.jpg
     
    #16 sean v4, May 9, 2015
    Last edited: May 9, 2015
    AandMev, AlexNatividad and asukadc like this.
  17. asukadc

    asukadc New Member

    Joined:
    Apr 10, 2015
    19
    8
    0
    Location:
    California
    Vehicle:
    2015 Prius v wagon
    Model:
    Three
    Cusco Rear End Chassis Brace - Toyota Prius V (2012-2015)
    Cusco Front Chassis Brace - Toyota Prius V (2012-2015)
    Cusco Rear Sway Bar (Add-On Bar) - Toyota Prius V (2012-2015)
    Cusco Front Sway Bar - Toyota Prius V (2012-2015)

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     
    #17 asukadc, May 9, 2015
    sean v4 likes this.
  18. sean v4

    sean v4 Junior Member

    Joined:
    Mar 6, 2015
    54
    12
    0
    Location:
    Corona, CA
    Vehicle:
    2015 Prius v wagon
    Model:
    Four
    Asukadc

    Nice pictures! Thanks. Those braces look cool. I am sure it handles much better.
    Are you planning on lowering and getting wheels too?
     
    #18 sean v4, May 9, 2015
  19. asukadc

    asukadc New Member

    Joined:
    Apr 10, 2015
    19
    8
    0
    Location:
    California
    Vehicle:
    2015 Prius v wagon
    Model:
    Three
    yeah, i wanted to do these and see how it improves the handling first, probably settle with springs for the lower drag and mpg. gonna get the eco line of volks
     
    #19 asukadc, May 9, 2015
  20. Boxer75

    Boxer75 New Member

    Joined:
    May 20, 2015
    1
    0
    0
    Location:
    CA
    Vehicle:
    2015 Prius v wagon
    Model:
    Two
    Mind if I ask which LED conversion kit did you buy?
     
    #20 Boxer75, May 20, 2015
(You must log in or sign up to post here.)
Page 1 of 5