1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Window doesn't go all the way down.

Discussion in 'Gen 3 Prius Care, Maintenance & Troubleshooting' started by XavierKing, Apr 17, 2015.

  1. XavierKing

    XavierKing Junior Member

    Joined:
    Aug 17, 2014
    18
    3
    0
    Location:
    Raleigh, NC
    Vehicle:
    2011 Prius
    Model:
    Three
    Greetings, all!

    I recently noticed that one of my windows doesn't go all the way down when I use the switch. I try auto down as well as holding the switch down until the window reaches the bottom, but no matter what, the window won't go down as far as the others.

    I was wondering if there was some sort of calibration that needed to be done. Thank you for your input.
     
  2. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    107,571
    48,862
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    sounds like you need to pull the door panel and see if something slipped or broke.
     
  3. XavierKing

    XavierKing Junior Member

    Joined:
    Aug 17, 2014
    18
    3
    0
    Location:
    Raleigh, NC
    Vehicle:
    2011 Prius
    Model:
    Three
    Shoot... that doesn't sound fun..
     
  4. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    107,571
    48,862
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    agreed. i'd live with it, if it was me.:cool:
     
  5. JC91006

    JC91006 Senior Member

    Joined:
    Nov 10, 2013
    16,464
    8,377
    0
    Location:
    Los Angeles, CA
    Vehicle:
    2008 Prius
    Model:
    II
    I'd leave it if it were one of my back windows. I rarely open those anyways....
     
  6. Former Member 68813

    Former Member 68813 Senior Member

    Joined:
    Oct 3, 2010
    3,524
    981
    8
    Location:
    US
    Vehicle:
    Other Hybrid
    Model:
    N/A
    i had that in a corolla. it was covered by the 36000 warranty. no idea what the problem was and how it was fixed.
     
  7. XavierKing

    XavierKing Junior Member

    Joined:
    Aug 17, 2014
    18
    3
    0
    Location:
    Raleigh, NC
    Vehicle:
    2011 Prius
    Model:
    Three
    Yup... My thoughts exactly. It's barely but a quarter inch from opening all the way and it operates flawlessly otherwise. I think I will definitely not worry about it.. I was just hoping I could calibrate it through some button press or something. Sounds like it may be a hardware issue! Thanks, all!!
     
  8. Yakoma

    Yakoma Active Member

    Joined:
    Oct 17, 2014
    470
    121
    0
    Location:
    ATL-ish
    Vehicle:
    2008 Prius
    Model:
    N/A
    I have a 2008 Gen 2, not a Gen 3, which has an initialization procedure that can be done when the 12V is disconnected (works the same way on my son's 2007 Scion).

    Open the window halfway. Fully close the window by holding the switch at least 3 seconds after it closes. That should initialize it.

    I think this is only for the driver's door on the Prius. Works for both sides and the moonroof on the Scion.

    If that doesn't work, I guess you'll have to remove the door panel and investigate.
     
    Bob Hahn likes this.