1. Attachments are working again! Check out this thread for more details and to report any other bugs.

2015 Prius v, lowercase v for the Prius v wagon, factory Speaker

Discussion in 'Prius v Audio and Electronics' started by venpat, Sep 26, 2016.

  1. venpat

    venpat New Member

    Joined:
    Sep 26, 2016
    3
    0
    0
    Location:
    Australia
    Vehicle:
    2015 Prius v wagon
    Model:
    N/A
    Hi Guys,

    I am new to here and hello to everyone.

    I am going to upgrade the sound system for my prius v and i can't really find the information for the depth of the factory speakers. i have one here and the depth is about 3 1/16 inch and i am concerning whether it is too depth for the replacement.

    Appreciate for any comment.

    Venpat
     
  2. Drewintoledo

    Drewintoledo Junior Member

    Joined:
    Dec 30, 2015
    49
    20
    1
    Location:
    Ohio
    Vehicle:
    2015 Prius v wagon
    Model:
    Three
    I don't have the answer that you're looking for, but if you install anything worthy, you'll most likely not have room but there's plenty of room to build the speaker opening out towards the panel. This is precisely what I did in my installation.

    Check out my thread, here:

    Yes another sound system install. | PriusChat
     
  3. venpat

    venpat New Member

    Joined:
    Sep 26, 2016
    3
    0
    0
    Location:
    Australia
    Vehicle:
    2015 Prius v wagon
    Model:
    N/A
    Thanks Drewintoledo, do you mean i can get a spacer and the speaker mounted to this? According to your thread, how thick of the spacer you make for your vehicle?

    Thanks
     
  4. Drewintoledo

    Drewintoledo Junior Member

    Joined:
    Dec 30, 2015
    49
    20
    1
    Location:
    Ohio
    Vehicle:
    2015 Prius v wagon
    Model:
    Three
    spacer is a good word to define what I built.

    I used whatever wood I had lying around... I think it was 5/8". I just took a small scrap piece of it and set it next to the hole. Then I placed the speaker against it and used it as a spacer to test fit the depth. Be sure to have your window DOWN. The magnet on the back of the speaker did not hit the window while it was rolled down into the door cavity so I decided the wood was thick enough. I cut a hole in the wood and built what you saw in my post.
     
  5. venpat

    venpat New Member

    Joined:
    Sep 26, 2016
    3
    0
    0
    Location:
    Australia
    Vehicle:
    2015 Prius v wagon
    Model:
    N/A
    Thanks Drewintoledo, I'm form Australia and this the term to describe it.

    Another question and i hope you can give me a clue.

    I took out the front door panel during the weekend and it should be enough room to install the 6.5 speaker. However the guard from the door panel is decide for 6 x 9" speaker and how can i enclose the gap between speaker and the guard to ensure this is no sound leakage from the gap.

    Many Thanks,
     
  6. Drewintoledo

    Drewintoledo Junior Member

    Joined:
    Dec 30, 2015
    49
    20
    1
    Location:
    Ohio
    Vehicle:
    2015 Prius v wagon
    Model:
    Three