1. Attachments are working again! Check out this thread for more details and to report any other bugs.

LH Fog/Driving Lens Broken, Need To Replace, Or Upgrade

Discussion in 'Gen 3 Prius Accessories and Modifications' started by txtabby, Oct 26, 2016.

Tags:
Page 2 of 3
  1. Phatlife

    Phatlife Member

    Joined:
    Oct 16, 2016
    107
    27
    0
    Location:
    New Jersey
    Vehicle:
    2015 Prius
    Model:
    Persona
    I'm thinking of going 3500k hid bulb, it should be yellow enough.. I ordered the Opti7 6000k led set for the h11's

    SM-G935T ?
     
    #21 Phatlife, Nov 3, 2016
  2. xliderider

    xliderider Senior Member

    Joined:
    Apr 19, 2012
    7,891
    3,125
    0
    Location:
    Honolulu, HI
    Vehicle:
    2011 Prius
    Model:
    Three
    The LED H11 might not be optimal for lowbeam use. You would probably have been better off going with HID on the H11 lowbeams.

    Again, let us know how the LED H11 works out for you. Especially paying attention to beam pattern and throw (how far the light goes forward down the road) from the lights.
     
    #22 xliderider, Nov 3, 2016
    Phatlife likes this.
  3. Xterra72

    Xterra72 Senior Member

    Joined:
    Oct 20, 2013
    1,408
    1,659
    0
    Vehicle:
    2013 Prius
    Model:
    Persona
    That's too bad. Sorry.
     
    #23 Xterra72, Nov 3, 2016
  4. Phatlife

    Phatlife Member

    Joined:
    Oct 16, 2016
    107
    27
    0
    Location:
    New Jersey
    Vehicle:
    2015 Prius
    Model:
    Persona
    why it's bad? the light is not scattered like the useless $ 300 oem's. lord of people have complained oem setup is ineffective in bad climates.

    SM-G935T ?
     
    #24 Phatlife, Nov 4, 2016
  5. xliderider

    xliderider Senior Member

    Joined:
    Apr 19, 2012
    7,891
    3,125
    0
    Location:
    Honolulu, HI
    Vehicle:
    2011 Prius
    Model:
    Three
    You misunderstood the post. It's too bad the laminate film won't go on the projector lenses...

    On the other hand, the LEDs you purchased probably won't have a very good beam pattern due to the design of the LEDs.

    A halogen bulb and an HID bulb both have pretty much a single point light source, whereas the LED gives off light from two sides, with a circuit board blocking the light from the other side.
     
    #25 xliderider, Nov 4, 2016
    Phatlife likes this.
  6. Phatlife

    Phatlife Member

    Joined:
    Oct 16, 2016
    107
    27
    0
    Location:
    New Jersey
    Vehicle:
    2015 Prius
    Model:
    Persona
    led will go in low beam, anything is better than halogen.. I have optilux by Hella in my camry, it's pretty good . for a halogen in the factory fog set. 123_1.jpeg

    SM-G935T ?
     
    #26 Phatlife, Nov 4, 2016
  7. Phatlife

    Phatlife Member

    Joined:
    Oct 16, 2016
    107
    27
    0
    Location:
    New Jersey
    Vehicle:
    2015 Prius
    Model:
    Persona
    so do you recommend the 3500k hid from xenon depot our the fog set?

    SM-G935T ?
     
    #27 Phatlife, Nov 4, 2016
  8. xliderider

    xliderider Senior Member

    Joined:
    Apr 19, 2012
    7,891
    3,125
    0
    Location:
    Honolulu, HI
    Vehicle:
    2011 Prius
    Model:
    Three
    No, IMO HID is overkill for foglights. Here's my Camry with 4300K HID in the lowbeams and 2500K Nokya halogens in the projector foglights:

    1478305131126.png
     
    #28 xliderider, Nov 4, 2016
  9. xliderider

    xliderider Senior Member

    Joined:
    Apr 19, 2012
    7,891
    3,125
    0
    Location:
    Honolulu, HI
    Vehicle:
    2011 Prius
    Model:
    Three
    Different view:

    1478305311487.png
     
    #29 xliderider, Nov 4, 2016
  10. Phatlife

    Phatlife Member

    Joined:
    Oct 16, 2016
    107
    27
    0
    Location:
    New Jersey
    Vehicle:
    2015 Prius
    Model:
    Persona
    I have the optilux on my camry with photo posted earlier

    SM-G935T ?
     
    #30 Phatlife, Nov 4, 2016
  11. xliderider

    xliderider Senior Member

    Joined:
    Apr 19, 2012
    7,891
    3,125
    0
    Location:
    Honolulu, HI
    Vehicle:
    2011 Prius
    Model:
    Three
    Yeah, that looks good. No HID necessary in the foglights.
     
    #31 xliderider, Nov 4, 2016
    Phatlife likes this.
  12. Phatlife

    Phatlife Member

    Joined:
    Oct 16, 2016
    107
    27
    0
    Location:
    New Jersey
    Vehicle:
    2015 Prius
    Model:
    Persona
    I like that color Chiezy had.. very sharp... 74365_6.jpeg

    SM-G935T ?
     
    #32 Phatlife, Nov 4, 2016
  13. Phatlife

    Phatlife Member

    Joined:
    Oct 16, 2016
    107
    27
    0
    Location:
    New Jersey
    Vehicle:
    2015 Prius
    Model:
    Persona
    I should stick to the optilux by Hella for the projector housing I purchased?
     
    #33 Phatlife, Nov 4, 2016
  14. txtabby

    txtabby 2011 Prius 4

    Joined:
    Mar 26, 2007
    123
    5
    0
    Location:
    Austin, TX
    Vehicle:
    2011 Prius
    Model:
    Four
    I got the parts, but I saw a good how-to guide on removing (folding out of the way) the front underside cover to access the fog lights. Anyone have that guide? Thanks!
     
    #34 txtabby, Nov 5, 2016
  15. Phatlife

    Phatlife Member

    Joined:
    Oct 16, 2016
    107
    27
    0
    Location:
    New Jersey
    Vehicle:
    2015 Prius
    Model:
    Persona
    isn't that just about a couple of screws to take off the bottom cover? I just ordered the fog light grille.. I have to pop off the whole bumper.. going to take my time.. how hard is to wire the bad boy with the Toyota yaris harness kit?

    SM-G935T ?
     
    #35 Phatlife, Nov 5, 2016
  16. txtabby

    txtabby 2011 Prius 4

    Joined:
    Mar 26, 2007
    123
    5
    0
    Location:
    Austin, TX
    Vehicle:
    2011 Prius
    Model:
    Four
    Not that simple. You have to remove fasteners and screws from the bottom cover, and the fender shields(?), then fold it down. I don't know if I can do it with jackstands, since the instructions I saw here had photos of the car on a lift.
     
    #36 txtabby, Nov 5, 2016
    Phatlife likes this.
  17. xliderider

    xliderider Senior Member

    Joined:
    Apr 19, 2012
    7,891
    3,125
    0
    Location:
    Honolulu, HI
    Vehicle:
    2011 Prius
    Model:
    Three
    You can definitely do it with jackstands.
     
    #37 xliderider, Nov 5, 2016
    Mendel Leisk likes this.
  18. Phatlife

    Phatlife Member

    Joined:
    Oct 16, 2016
    107
    27
    0
    Location:
    New Jersey
    Vehicle:
    2015 Prius
    Model:
    Persona
    anyone have the instructions?

    SM-G935T ?
     
    #38 Phatlife, Nov 5, 2016
  19. xliderider

    xliderider Senior Member

    Joined:
    Apr 19, 2012
    7,891
    3,125
    0
    Location:
    Honolulu, HI
    Vehicle:
    2011 Prius
    Model:
    Three
    #39 xliderider, Nov 5, 2016
    Xterra72 likes this.
  20. Phatlife

    Phatlife Member

    Joined:
    Oct 16, 2016
    107
    27
    0
    Location:
    New Jersey
    Vehicle:
    2015 Prius
    Model:
    Persona
    20161107_193741.jpeg 20161107_193028.jpeg 20161107_193720.jpeg 20161107_193712.jpeg

    My Opt7 low beam leds.. 1st day.. not far as hid , but better than factory halogens..

    SM-G935T ?
     
    #40 Phatlife, Nov 7, 2016
(You must log in or sign up to post here.)
Page 2 of 3