1. Attachments are working again! Check out this thread for more details and to report any other bugs.

HybridAssistant - Beta Testers Wanted!

Discussion in 'Prius OBDII Third-Party Apps' started by frenchie, Aug 27, 2016.

  1. frenchie

    frenchie Member

    Joined:
    Oct 19, 2004
    150
    48
    0
    Location:
    France, not far from PARIS
    Vehicle:
    Other Hybrid
    Model:
    N/A
    Hybrid owners using android and having an OBDLINK LX can test a new application.

    See all the details in above link

    It recognises automatically the car model and adapts itself.

    Until today, it was tested on P2, Gen3 (P3, P+, Auris, CT200h), YARIS, PRIUS C, RX400h, IS300h, RAV4h...
    No luck with P4...

    The application is free, no ads and available on playstore.

    Interfaces working well: OBDLINK LX, OBDLINK SX.
    not so well (not fast) : OBDLINK MX (wifi), Icarsoft BT620.
    badly (or not at all) the cheap chinese pseudo elm327.

    At this time, we are dealing with "normal" units (metric :cool: ).
    We are planning to adapt to Miles & °F within a short time.

    The application is stable enough but not completely finished (the sexy look will come later).

    There are 2 developpers Alessandro (who developped tools for analysing torquelogs)
    and myself (I am familiar to retrieving PIDs, I started with P3 followed by RX400h, IS300h and finally RAV4h).

    Enjoy
     
    #1 frenchie, Aug 27, 2016
    SFO, bisco and Alessandro71 like this.
  2. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    107,686
    48,936
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    cool, all the best!(y)
     
    #2 bisco, Aug 27, 2016
  3. frenchie

    frenchie Member

    Joined:
    Oct 19, 2004
    150
    48
    0
    Location:
    France, not far from PARIS
    Vehicle:
    Other Hybrid
    Model:
    N/A
    @bisco, In fact, I tested HA on Prius C (my daughter's car) in July, in Boston...
     
    #3 frenchie, Aug 27, 2016
    bisco likes this.
  4. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    107,686
    48,936
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    i think i saw you!(y)
     
    #4 bisco, Aug 27, 2016
  5. ccdisce

    ccdisce Active Member

    Joined:
    Oct 10, 2010
    259
    187
    0
    Location:
    Stone Mtn GA USA
    Vehicle:
    2008 Prius
    Model:
    N/A

    Thanks for doing this. I downloaded the App and it works fine with my OBDLink MX (bluetooth)

    I could not find the WiFi version as I realy wanted to test out my high speed OBD2 adapter which runs its internal UART bus at 2Mbaud..
    I use a high speed WiFi module from Espressif.
    Priidash likes to see a speed higher than 921600 to be able to execute the ATMA command on a CAN Bus running at 500K.
     
    #5 ccdisce, Sep 6, 2016
    SFO likes this.
  6. frenchie

    frenchie Member

    Joined:
    Oct 19, 2004
    150
    48
    0
    Location:
    France, not far from PARIS
    Vehicle:
    Other Hybrid
    Model:
    N/A
    Bonjour ccdisce.
    Today, the application is not "finished", but you can use a wifi adapter:

    create in the application folder "_hybridassistant" a file named "connexionmode.txt".
    the content of this file should be the word WIFI
    config is the same as Torque: 192.168.0.10 , port 35000.

    If the content of this file is USB, HA will work perfectly with OBDLINK SX.
    ​
    With HA, we do not use passive frames. (Anyway there are not any more passive frames in actual models)
    Only requests, different depending on car model.

    By curiosity, you can activate obdlogging from Settings in ReportViewer and have a look to the logs (files starting with fx )
     
    #6 frenchie, Sep 7, 2016
    SFO and alexgrigori like this.
  7. alexgrigori

    alexgrigori Active Member

    Joined:
    Oct 6, 2016
    163
    108
    0
    Location:
    Canada
    Vehicle:
    2017 Prius
    Model:
    Technology
    frenchie, thanks for your assistance.
    Any luck with Prius gen 4?

    My intention is get access to the hybrid component info, like battery temperature, voltage, cooling fan speed, etc. Ideally, if possible, it would nice to map the status if individual cells in battery pack.
     
    #7 alexgrigori, Oct 12, 2016
    Last edited: Oct 12, 2016
  8. Maxroach

    Maxroach New Member

    Joined:
    Nov 11, 2016
    6
    2
    0
    Location:
    London
    Vehicle:
    Other Non-Hybrid
    Model:
    N/A
    Looks good - downloading now! Will give feedback soon.
     
    #8 Maxroach, Nov 18, 2016
    bisco likes this.
  9. SharkNX

    SharkNX Junior Member

    Joined:
    Aug 6, 2015
    2
    1
    0
    Location:
    Bratislava, Slovakia
    Vehicle:
    Other Hybrid
    Model:
    N/A
    Hey guys. Great job with that app.
    I've tested it with Samsung Galaxy S5 and S6 with Carista adapter and it works fine. All the app functionalities works.
    Is there any limitations to Android version? I would like to dedicate older Huawei tablet with Android 4.0.1 to run this app.


    Wysłane z iPhone za pomocą Tapatalk
     
    #9 SharkNX, Jan 4, 2017
  10. bobzchemist

    bobzchemist Active Member

    Joined:
    Aug 2, 2016
    507
    342
    0
    Location:
    Kennesaw, Georgia, USA
    Vehicle:
    2010 Prius
    Model:
    IV
    #10 bobzchemist, Jan 4, 2017
  11. frenchie

    frenchie Member

    Joined:
    Oct 19, 2004
    150
    48
    0
    Location:
    France, not far from PARIS
    Vehicle:
    Other Hybrid
    Model:
    N/A
    the kiwi2 should work...
    the kiwi3 works very very slowly with HybridAssistant...
     
    #11 frenchie, Jan 20, 2017
  12. alexgrigori

    alexgrigori Active Member

    Joined:
    Oct 6, 2016
    163
    108
    0
    Location:
    Canada
    Vehicle:
    2017 Prius
    Model:
    Technology
    I've got the following iKKEGOL iCar 2 Mini OBD2 II Bluetooth Car Diagnostic Scanner:
    iCar 2 scantool is a high-quality automotive scanning tool, supports all OBD-II protocols :
    0.Automatic
    1.SAE J1850 PWM(41.6Kbaud)
    2.SAE J1850 VPW(10.4Kbaud)
    3.ISO9141-2(5 baud init,10.4Kbaud)
    4.ISO14230-4 KWP(5 baud init,10.4 Kbaud)
    5.ISO14230-4 KWP(fast init,10.4 Kbaud)
    6.ISO15765-4 CAN(11bit ID,500 Kbaud)
    7.ISO15765-4 CAN(29bit ID,500 Kbaud)
    8.ISO15765-4 CAN(11bit ID,250 Kbaud)
    9.ISO15765-4 CAN(29bit ID,250 Kbaud)
    A.SAE J1939 CAN(29bit ID,250*Kbaud)
    B.USER1 CAN(11*bit ID,125*Kbaud)
    C.USER2 CAN(11*bit ID,50*kbaud)
    Default settings(user adjustable)
    [​IMG]

    but HybridAssistant does not work with it for the reasons beyond my understanding.
    Am I doing something wrong?
    Please note that this adapter does work with Carista and Torque.
     
    #12 alexgrigori, Jan 20, 2017
    Last edited: Jan 20, 2017
(You must log in or sign up to post here.)