1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Crank Sensor Location

Discussion in 'Gen 2 Prius Care, Maintenance and Troubleshooting' started by laivindil, Jul 20, 2017.

  1. laivindil

    laivindil Junior Member

    Joined:
    Sep 19, 2009
    10
    2
    0
    Location:
    Norfolk, VA
    Vehicle:
    2004 Prius
    Model:
    N/A
    Purchased a new Crank Sensor (Toyota part # 90919-05087) for my 2004 Prius. Searched the forum, and the interwebs, and cannot seem to find the exact location of the sensor.

    Anyone have a pic or diagram of its location? Thanks
     
    #1 laivindil, Jul 20, 2017
  2. Jmack111

    Jmack111 Member

    Joined:
    Nov 3, 2009
    370
    78
    0
    Location:
    Tacoma wa
    Vehicle:
    2004 Prius
    Model:
    N/A
    Left side of engine in the front towards the grill 1st wire you see going down on the left side of The engine And the boat just below that is the filter Needs to be clean too behind bolt

    Posted via the PriusChat mobile app.
     
    #2 Jmack111, Jul 20, 2017
  3. laivindil

    laivindil Junior Member

    Joined:
    Sep 19, 2009
    10
    2
    0
    Location:
    Norfolk, VA
    Vehicle:
    2004 Prius
    Model:
    N/A
    Left side... do you mean passenger side? As in the same side with belt and water pump?
     
    #3 laivindil, Jul 21, 2017
  4. Jmack111

    Jmack111 Member

    Joined:
    Nov 3, 2009
    370
    78
    0
    Location:
    Tacoma wa
    Vehicle:
    2004 Prius
    Model:
    N/A
    #4 Jmack111, Jul 21, 2017
  5. Patrick Wong

    Patrick Wong DIY Enthusiast

    Joined:
    Mar 8, 2008
    18,200
    6,479
    0
    Location:
    Green Valley, AZ
    Vehicle:
    2015 Prius
    Model:
    Two
    The crank position sensor is very near the crankshaft pulley, passenger side of the engine. One bolt holds the sensor to the engine block. Raise up the front of the car to have adequate access to get under the engine, then you can easily see the sensor.
     
    #5 Patrick Wong, Jul 21, 2017
    m.wynn likes this.
  6. laivindil

    laivindil Junior Member

    Joined:
    Sep 19, 2009
    10
    2
    0
    Location:
    Norfolk, VA
    Vehicle:
    2004 Prius
    Model:
    N/A
    Thanks guys. :)
     
    #6 laivindil, Jul 22, 2017
  7. Patrick Wong

    Patrick Wong DIY Enthusiast

    Joined:
    Mar 8, 2008
    18,200
    6,479
    0
    Location:
    Green Valley, AZ
    Vehicle:
    2015 Prius
    Model:
    Two
    What were the circumstances leading to the need to replace the sensor?
     
    #7 Patrick Wong, Jul 22, 2017
    jerrymildred likes this.
  8. laivindil

    laivindil Junior Member

    Joined:
    Sep 19, 2009
    10
    2
    0
    Location:
    Norfolk, VA
    Vehicle:
    2004 Prius
    Model:
    N/A
    Error code and dealer diagnostic. Could end up being the timing chain, but I will stop at the crank sensor. I have over 300,000 miles (odo stopped at 299,999 in 2015), so it is not worth the money and effort to replace the chain if that is, in the end, the real issue. I will drive it until it blows up, sell it for parts, and buy a lower mileage used Prius.
     
    #8 laivindil, Jul 22, 2017
    Raytheeagle and Patrick Wong like this.
  9. Jakl2008

    Jakl2008 New Member

    Joined:
    Mar 31, 2019
    2
    0
    0
    Location:
    Waterloo NY
    Vehicle:
    2008 Prius
    Model:
    ----USA----
    Remove the passenger side front wheel. Remove or move the plastics shroud out of the way. It’s that easy. The diagram on the internet to its location is wrong.
     

    Attached Files:

    #9 Jakl2008, Mar 31, 2019
  10. Jakl2008

    Jakl2008 New Member

    Joined:
    Mar 31, 2019
    2
    0
    0
    Location:
    Waterloo NY
    Vehicle:
    2008 Prius
    Model:
    ----USA----
    The diagram isn’t wrong just difficult to read. It looks like it’s by the exhaust manifold. Enlarge the pic and you will see it’s on the passenger side of the engine lower near the crank pulley.
     
    #10 Jakl2008, Mar 31, 2019
(You must log in or sign up to post here.)