My rear wiper blade has partially separated from the part that goes on the arm. It's raining test again this morning, and I use it a couple times on my way to work. Took her in for my penultimate oil Toyota Care service yesterday, but they were out. I'm thinking about Loctite Go 2 Glue, which is a non cyanoacrylate. Anyone have better ideas' Posted via the PriusChat mobile app.
Not being facetious, but consider not using the rear wiper. If you can get up to ~50mph the rear window clears itself with the slipstream. Outside of Toyota, there's not much in the compatible market over here.
I say this without having done it on Gen 4, but what I would try (and have done with past Prius) is take the wiper arm off the car and carry it into a parts store and find a match
Just go to Autozone or equivalent and tell them what you want. They'll look it up. If you ask, lots of times they will even install it for you But I also echo the "just don't use it" comment.... there's really no need for a rear wiper on a sedan. Some models don't even have one. Mine doesn't. It never even gets bad enough that I'd ever use one, even if I had one to use
I assume you need part 6 or 7 in this diagram. This dealer sells online. I have ordered parts from them in the past. 2016 Toyota Prius Parts - metrotoyotapartsnow.com
Amazon also has them. Because of the issue I had with getting replacements for the front, I bought a spare rear one. I believe it's Bosch and it matches perfectly. Bosch Rear Wiper Blade H409 /3397011431 Original Equipment Replacement- 16" (Pack of 1)