1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Will ScanGauge II work correctly in Prime?

Discussion in 'Prime Main Forum (2017-2022)' started by dafinn, Dec 12, 2017.

  1. Alvin Huang

    Alvin Huang Junior Member

    Joined:
    Nov 7, 2017
    22
    7
    0
    Location:
    Taiwan
    Vehicle:
    2017 Prius Prime
    Model:
    Plug-in Advanced
    In the RM100000001009M.pdf, here is A/C information.
    A/C Consumption - Power A/C consumption power- Min.: 0.00 kW, Max.:12.75 kW - While the air conditioning system is operating:0 to 5.00 kW - Air conditioning system
    From definition, I think the MTH I used 0014000100000 should be correct as I observed..
     
  2. Alvin Huang

    Alvin Huang Junior Member

    Joined:
    Nov 7, 2017
    22
    7
    0
    Location:
    Taiwan
    Vehicle:
    2017 Prius Prime
    Model:
    Plug-in Advanced
    @Linear Logic
    Can we have Auxliary Battery volt/current/temperature? I saw them in Techstream..
    It seems quite important since all electrical devices using 12V battery except traction motors and air condition compressor.
    Thanks!
     
  3. Linear Logic

    Linear Logic Junior Member

    Joined:
    May 19, 2011
    14
    38
    0
    Location:
    Mesa
    Vehicle:
    2017 Prius Prime
    Model:
    N/A
    I've added the following:

    Auxiliary Battery Current

    Auxiliary Battery Temperature

    For Aux Battery Temperature, if you use a MTH of 00010001FE70 it should read in °C if that's your preference.

    Also, with regard to an XGauge for Auxiliary Battery Voltage, it may not be necessary. The VLT gauge on the ScanGauge will show you the 12V battery voltage. The OBDII port is wired directly to the battery (with only a fuse in between) so the ScanGauge is able to take a direct voltage reading of the battery and displays it as the VLT gauge on the gauge screen.
     
  4. Alvin Huang

    Alvin Huang Junior Member

    Joined:
    Nov 7, 2017
    22
    7
    0
    Location:
    Taiwan
    Vehicle:
    2017 Prius Prime
    Model:
    Plug-in Advanced
    Yes! worked as a charm !
    Thanks alot !
     
  5. Alvin Huang

    Alvin Huang Junior Member

    Joined:
    Nov 7, 2017
    22
    7
    0
    Location:
    Taiwan
    Vehicle:
    2017 Prius Prime
    Model:
    Plug-in Advanced
    @Linear Logic If the current value is negative, is it under charging or discharging?
     
  6. Linear Logic

    Linear Logic Junior Member

    Joined:
    May 19, 2011
    14
    38
    0
    Location:
    Mesa
    Vehicle:
    2017 Prius Prime
    Model:
    N/A
    A negative value I believe means it's charging.
     
    #66 Linear Logic, Apr 5, 2018
    Last edited: Apr 5, 2018
    Alvin Huang likes this.
  7. priuscatprimeguy

    priuscatprimeguy Senior Member

    Joined:
    Nov 1, 2016
    2,730
    2,640
    0
    Location:
    Farmington Hills, Michigan
    Vehicle:
    2017 Prius Prime
    Model:
    Prime Advanced
    @Linear Logic today is the first day i've hooked up my ScanGuage to my prime. Question, the Scan Guage turns off when I turn off the car, but turns back on when the car is charging and does not shut off, will it shut off when charging is completed?
     
  8. PCPrime

    PCPrime Member

    Joined:
    Jan 28, 2018
    110
    102
    0
    Location:
    Tampa Florida
    Vehicle:
    2017 Prius Prime
    Model:
    Prime Advanced
    Yes, it will shutoff when charging is completed
     
  9. Mark57

    Mark57 2021 Tesla Model 3 LR AWD

    Joined:
    Aug 14, 2009
    2,945
    2,737
    0
    Location:
    OK
    Vehicle:
    Other Electric Vehicle
    Model:
    N/A
    It will also turn on when you walk close enough to it to wake up the car with the key fob in your pocket.

    If any of this bothers anyone it's very easy to just disconnect the cable from the back of the SGII before you get out. That way you know there's no power draw. Easy to reconnect. Snap!