1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Dealer says need lower control arms $1040

Discussion in 'Gen 2 Prius Care, Maintenance and Troubleshooting' started by goldfinger, Dec 19, 2014.

  1. goldfinger

    goldfinger Active Member

    Joined:
    Mar 12, 2012
    535
    402
    0
    Location:
    Buffalo
    Vehicle:
    2016 Prius
    Model:
    Three
    OK, here's the story's conclusion. I just got my car back from a shop down the street, 5 minute walk. They worked a half day today on Christmas Eve. They would not use my parts because of insurance reasons so I paid $150 per control arm. Still better than $264 each at Toyota. It came to $664 including alignment. The car drives better. I must have been slow boiled because I didn't realize it was driving bad.

    Here are the control arms. The guy at the shop said the salt and calcium attack the rubber. I suppose that's the cost of living in Buffalo.
    IMG_20141224_125436.jpg

    I feel that I got a fair deal not that the dealer was trying to do me, its just how they roll. If you're in the Buffalo area I recommend Bailey Tire. I've been getting my tires here for awhile.

    Thanks everyone for the help.
     
    SFO and edthefox5 like this.
  2. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    107,571
    48,861
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    at 12 feet of snow a year, what are the benefits?:p
     
  3. css28

    css28 Senior Member

    Joined:
    Feb 27, 2012
    1,566
    442
    3
    Location:
    Suburban Detroit
    Vehicle:
    2011 Prius
    Model:
    Three
    I'll start in with the following benefits:
    - The winters are relatively mild for temperature
    - Niagara area including vineyards
    - Toronto's not too far away
    - Affordable real estate
     
  4. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    107,571
    48,861
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    i like the real estate. but so is florida.(y)
     
  5. Classic_pri

    Classic_pri Former 2001 Prius 0wner

    Joined:
    Feb 22, 2008
    108
    27
    2
    Location:
    Wisconsin
    Vehicle:
    2007 Prius
    Model:
    Touring
    Be careful with aftermarket parts. There's a lot of junk out there, and poorly made suspension bushings tend to fail quickly.

    I'd find a good independent to do the job and let him/her provide the parts. My local tire shop changed some suspension arms on my BMW last month with Moog components and gave me a lifetime warranty on parts and labor.
     
  6. edthefox5

    edthefox5 Senior Member

    Joined:
    Jul 25, 2007
    10,096
    4,795
    0
    Location:
    Clearwater, Florida
    Vehicle:
    2007 Prius
    Model:
    Two
    You started out right but then did what you just said not to do. Moog in the last few years has gone the same route as everyone else.

    China

    Last year I bought some Moog stab links from Rock Auto. The quality was so poor the bolt couldn't thread on the end. I called Rock and they said to throw them out and they would credit me and they did. Nothing is as good as OEM especially OEM BMW.
     
  7. Siberian_man

    Siberian_man New Member

    Joined:
    Nov 15, 2015
    2
    0
    0
    Location:
    Russia
    Vehicle:
    2011 Prius
    Model:
    N/A
    Prius 20

    Fr suspension

    [​IMG]

    1-01-737 8.45 $ for 1 pcs.
    or
    1-01-758 9.07 $ for 1 pcs.
    1-06-414 17.49 $ for 1 pcs.
    1-06-1069 28.09 $ for 1 pcs.
    free shipping worldwide

    Rr suspension

    [​IMG]


    1-06-2005 44.68 $ for 1 pcs.
    free shipping worldwide

    Prius 11 Fr


    [​IMG]

    1-01-483 7.67 $ for 1 pcs.
    1-06-1072 24.20 $ for 1 pcs.
    1-06-414 17.49 $ for 1 pcs.
    free shipping worldwide
     
  8. Brandonholohibrido

    Brandonholohibrido Junior Member

    Joined:
    May 10, 2016
    65
    4
    0
    Location:
    Houston, TX
    Vehicle:
    2007 Prius
    Model:
    ----USA----
    What Would you guys say about a prius 2013 with 203k miles and a bad front left control arm for $6500 dlls?
     
  9. Patrick Wong

    Patrick Wong DIY Enthusiast

    Joined:
    Mar 8, 2008
    18,198
    6,461
    0
    Location:
    Green Valley, AZ
    Vehicle:
    2015 Prius
    Model:
    Two
    A failed suspension part is minor compared to the other problems the car might have with 203K miles.
     
  10. M in KC

    M in KC Active Member

    Joined:
    Jun 21, 2014
    358
    106
    0
    Location:
    KC, MO
    Vehicle:
    2005 Prius
    For $6500 you could get a lower mileage Prius. Keep shopping.
     
  11. Sajidbhuta

    Sajidbhuta New Member

    Joined:
    Jun 7, 2018
    3
    0
    0
    Location:
    U.K.
    Vehicle:
    2008 Prius
    Model:
    II
    Hi John
    Just went to my local dealership in London and they said to me they don’t sell them separately I’ve got to buy the whole arm maybe they’ve stop selling them separately :(
     
  12. edthefox5

    edthefox5 Senior Member

    Joined:
    Jul 25, 2007
    10,096
    4,795
    0
    Location:
    Clearwater, Florida
    Vehicle:
    2007 Prius
    Model:
    Two
    Your asking questions on a 2 year old post. I don’t see Britprius here anymore. Don’t hijack posts start your own thread you will have much more hits on it and help.
     
  13. Britprius

    Britprius Senior Member

    Joined:
    Jun 14, 2010
    5,194
    1,910
    0
    Location:
    Herefordshire England
    Vehicle:
    2008 Prius
    Ebay has the complete kit of bushes on sale for £16-90 delivered.

    eBay item number:
    253227724955

    I do look in occasionally to see whats happening.

    John.
     
    Sajidbhuta likes this.
  14. edthefox5

    edthefox5 Senior Member

    Joined:
    Jul 25, 2007
    10,096
    4,795
    0
    Location:
    Clearwater, Florida
    Vehicle:
    2007 Prius
    Model:
    Two
    Havent seen you in a while thanks.
     
  15. Britprius

    Britprius Senior Member

    Joined:
    Jun 14, 2010
    5,194
    1,910
    0
    Location:
    Herefordshire England
    Vehicle:
    2008 Prius
    Like a bad penny I do show up occasionally. Although I no longer contribute on a regular basis "having sold the Prius, and bought a Lexus GS450H" I do check in, and if there is anything flagged up at the top of the screen I try to help if I can.

    John.
    P_20170316_155334.jpg P_20170316_155355.jpg
     
  16. edthefox5

    edthefox5 Senior Member

    Joined:
    Jul 25, 2007
    10,096
    4,795
    0
    Location:
    Clearwater, Florida
    Vehicle:
    2007 Prius
    Model:
    Two
    Nice car love the wheels
     
  17. Britprius

    Britprius Senior Member

    Joined:
    Jun 14, 2010
    5,194
    1,910
    0
    Location:
    Herefordshire England
    Vehicle:
    2008 Prius
    The GS450H proves that a hybrid does not have to be slow. weighing 2 tons it does 0 to 62 in 5.2 seconds, and has an electronically limited top speed of 165 mph returning 41mpg (UK gallons)

    John.
     
  18. Sajidbhuta

    Sajidbhuta New Member

    Joined:
    Jun 7, 2018
    3
    0
    0
    Location:
    U.K.
    Vehicle:
    2008 Prius
    Model:
    II
    Thanks John
    Thanks John
    Appreciate the reply.
     
  19. farmecologist

    farmecologist Senior Member

    Joined:
    Jun 25, 2015
    1,945
    1,785
    0
    Location:
    Southern MN
    Vehicle:
    2012 Prius v wagon
    Model:
    II
    Not sure this will help...but I recently completed a front suspension overhaul on my 2012 Prisu v (wagon).

    Suspension component torque specs? | Page 3 | PriusChat

    There is much more discussion of you look at the entire thread. Lots of discussion about research I did before the job...and the problems I ran into. Note that on the Gen3 and Prius v (wagon) you DO have to jack the passenger side of the engine up about an inch to get one of the control arm bolts out. It was a little scary doing this but went well using a trick that is documented in the thread above.

    Obviously the Gen2 will differ but I think they are similar enough that it might be of some benefit.

    Edit : Oops..didn't see that this is a really old thread before I posted the above...the recent posts made it pop up in my 'new posts' list I guess. (y) At any rate I'll leave it here for any DIY'ers that come across this thread.
     
    Raytheeagle likes this.