1. Attachments are working again! Check out this thread for more details and to report any other bugs.

2007 Prius TPMS Woes

Discussion in 'Gen 2 Prius Care, Maintenance and Troubleshooting' started by sdrocker, Feb 16, 2016.

  1. wjtracy

    wjtracy Senior Member

    Joined:
    Sep 19, 2006
    11,321
    3,590
    1
    Location:
    Northern VA (NoVA)
    Vehicle:
    Other Hybrid
    Model:
    N/A
    ...if you check MiniVCI Toyota on Amazon look at the highlighted negative review he shows how to check for bad solder joints and fix it. Although seems funny to have partially working VCI.
     
  2. sdrocker

    sdrocker Member

    Joined:
    Jan 26, 2015
    166
    8
    0
    Location:
    San Diego
    Vehicle:
    2007 Prius
    Model:
    II
    Wow that's interesting! And I literally gave away all my hot air rework soldering equipment a few weeks ago.. ahh!!! I also think it's weird it would partially work from bad solder joints.
     
  3. wjtracy

    wjtracy Senior Member

    Joined:
    Sep 19, 2006
    11,321
    3,590
    1
    Location:
    Northern VA (NoVA)
    Vehicle:
    Other Hybrid
    Model:
    N/A
    also check the other connections as he shows
     
  4. sdrocker

    sdrocker Member

    Joined:
    Jan 26, 2015
    166
    8
    0
    Location:
    San Diego
    Vehicle:
    2007 Prius
    Model:
    II
    Thanks taking a look now.
     
  5. wjtracy

    wjtracy Senior Member

    Joined:
    Sep 19, 2006
    11,321
    3,590
    1
    Location:
    Northern VA (NoVA)
    Vehicle:
    Other Hybrid
    Model:
    N/A
    I decided to order one of the 64-bit mini VCI so I gotta wait for epacket from China.
     
  6. sdrocker

    sdrocker Member

    Joined:
    Jan 26, 2015
    166
    8
    0
    Location:
    San Diego
    Vehicle:
    2007 Prius
    Model:
    II
    Oh interesting. Your's is a Gen 2 prius? If you can connect to the TPMS, I'll buy one just like yours.



    Merged


    EDIT: I just got back from the tire shop. 3 and a half hours of waiting.

    They told me they were going to try a different sensor. They did that and were able to reprogram it and now the light is gone. They didn't explain the difference between the sensor they put in on Tuesday and the sensor they put in today. Supposedly they had to order it and that's why I was waiting around for a while. I wonder if it came from Toyota hmm.....

    They also gave me a future free oil change.
     
    #26 sdrocker, Feb 18, 2016
    Last edited by a moderator: Mar 5, 2016
    wjtracy likes this.
  7. wjtracy

    wjtracy Senior Member

    Joined:
    Sep 19, 2006
    11,321
    3,590
    1
    Location:
    Northern VA (NoVA)
    Vehicle:
    Other Hybrid
    Model:
    N/A
    apparently the denso on Amazon are a match to OEM
     
    sdrocker likes this.
  8. exstudent

    exstudent Senior Member

    Joined:
    Jul 11, 2009
    2,213
    901
    0
    Location:
    Torrance, CA
    Vehicle:
    2007 Prius
    I say pass on free oil change. Expect long wait and the oil level to be overfilled. Worst case of an oil overfill, here on PriusChat, resulted in a used engine replacement.

    Acquire tools to DIY. I can do it in 30min, start to finsh w/ clean up. Rotating tires adds 15min.
     
  9. sdrocker

    sdrocker Member

    Joined:
    Jan 26, 2015
    166
    8
    0
    Location:
    San Diego
    Vehicle:
    2007 Prius
    Model:
    II
    True. I did the last two oil changes myself and am aware not to overfill. Quite possible they may do just that.
     
  10. wjtracy

    wjtracy Senior Member

    Joined:
    Sep 19, 2006
    11,321
    3,590
    1
    Location:
    Northern VA (NoVA)
    Vehicle:
    Other Hybrid
    Model:
    N/A
    OK I got mini VCI from China the 32 and 64 bit version for $39 bucks. Turned out my old computer was XP 32 bit, so I have not tried the 64 bit software install yet. 32 bit worked fine.

    Re; Techstream TPMS- I noticed there was input codes for 5 tires ID1 thru ID5 and ID5 was set for code 0000000 (which meant unused). So I reset the TMPS by entering 0000000 code for the bad TMPS (ID1 right front), thus shutting off the darn flashing idiot light. Next step I will buy a new Denso sensor from Amazon. I let a little air out of each tire to figure out which tire was which.
     
    #30 wjtracy, Mar 5, 2016
    Last edited: Mar 5, 2016
  11. genchau

    genchau Junior Member

    Joined:
    Mar 5, 2011
    6
    2
    0
    Location:
    Los Angeles, CA USA
    Vehicle:
    2001 Prius
    Model:
    N/A
    Thank you @wjtracy that's the exact info I needed. I wanted to program 0000000 into one of the bad sensor last night but found out my mini vci lacked ecu programming functionality because it's v1.4.1. This version does not have k-line communication which is used for programming. I'm ordering a mini vci v2.0.4 on Amazon for $42 which should solve that problem and allow me to program tpms.

    I only have one bad sensor right now. I hope to buy a used one for $20 to replace it. Then I'll replace the battery on the bad one and save it until the next one goes out.
     
    wjtracy likes this.
  12. JC91006

    JC91006 Senior Member

    Joined:
    Nov 10, 2013
    16,477
    8,394
    0
    Location:
    Los Angeles, CA
    Vehicle:
    2008 Prius
    Model:
    II
    The 0000000 doesn't work if you drive more than 1 hour, the car's ECU will pick up the error again. Only works if you drive less than 1 hour and shut down
     
  13. wjtracy

    wjtracy Senior Member

    Joined:
    Sep 19, 2006
    11,321
    3,590
    1
    Location:
    Northern VA (NoVA)
    Vehicle:
    Other Hybrid
    Model:
    N/A
    Yes that post is a little old, setting to 0000000 seems to be a temporary reset.
    The following thread gives all the things I have tried:
    TPMS Management with Techstream | PriusChat

    Right now I finally lost my second TPMS unit at 12 years, so my warning light is back on. I probably need at least 2 new tires....if so I may finally replace all the old TPMS.